Before & After Photos

A quiet household in Camp Verde, AZ, found itself grappling with a silent crisis when the back patio began to settle unevenly. What started as a faint crack soon widened into a gaping fissure, lowering one side of the slab by several inches and making outdoor gatherings a safety hazard. Inside the home, subtle signs emerged: doors that scraped the jamb, slight tilts in the floors, and hairline fractures snaking along the walls. The family’s frustration mounted as everyday routines—parking in the garage, walking along the patio—became exercises in caution, and concerns over long-term damage loomed large.

The Search for a Solution

DIY patch-and-seal kits offered temporary relief but no guarantee against future settlement. Traditional mudjacking services touted low costs but carried risks of introducing even more weight to already compressed soils. Local handymen could fill cracks, yet none could promise a permanent fix or address the root cause: unstable, eroding soil beneath the concrete. Recognizing that foundation and slab problems demand specialized expertise, the homeowners knew it was time to look beyond patch-and-pray solutions.

Why Arizona Foundation Solutions?

A neighbor’s recommendation led the homeowners to Arizona Foundation Solutions (AZFS). The company’s reputation for thorough, transparent inspections and advanced repair methods immediately set it apart. During the free on-site evaluation, AZFS technicians explained how PolyLevel® Injection Foam could lift and level the 879 sq ft patio slab without the invasive bulk of mudjacking, and how NexusPro sealant would deliver long-lasting crack protection. This customer-first approach, backed by clear explanations and real-world before-and-after examples, provided the trust needed to proceed.

The Repair Process

1. Bluestake Compliance & Initial Locate
2. On July 1, 2025 (Bluestake ticket #1-402-833-3706
   1-844-630-1670), AZFS mobilized its crew to Camp Verde, completing the mandatory utility locate to mark underground lines.
3. PolyLevel® Injection Foam Application
4. Preparation: Small, discrete 5/8 in holes were drilled through the sunken slab panels.
5. Injection: PolyLevel®—a two-part geopolymer foam—was pumped beneath the slab. Expanding up to 15 times its initial volume, the foam filled voids and lifted the concrete to precise tolerances.
6. Curing: Within 15 minutes, the material supported full load, allowing the patio to be returned to service almost instantly.
7. NexusPro Joint & Crack Sealing (50 ft)
8. Existing control joints and the large crack were routed, cleaned, and fitted with backer rod.
9. NexusPro, a silicone-based sealant resistant to UV, extreme temperatures, and wash-out, was tooled into each gap.
10. A fine layer of native sand was applied for a seamless, uniform finish.

Final Inspection & Cleanup

The crew performed a walk-through to verify levelness, seal integrity, and site cleanliness before demobilizing.

Transformation – The After

By the end of the day, the back patio was restored to an even, sturdy surface. The previously sunken slab panels now aligned seamlessly, eliminating tripping hazards. Doors closed smoothly again, and the widened wall cracks no longer threatened interior finishes. The homeowners immediately noticed the difference: a solid, safe patio and the peace of mind that comes with a structurally sound foundation.

Emotional Engine – The Power of Trust

Acting early prevented further soil erosion and costly home damage. Through proactive communication and visible, measurable results, Arizona Foundation Solutions demonstrated why specialized polymer injection and expert joint sealing outperform quick-fix alternatives. Homeowners learned that transparent assessments and advanced materials like PolyLevel® and NexusPro aren’t just technical choices—they’re investments in long-term stability and safety.

New Era – A Win for Everyone

The successful project in Camp Verde illustrates how modern geotechnical solutions can revitalize homes at risk of settling. With the 879 sq ft concrete lift and level process completed alongside 50 ft of NexusPro sealant, the property’s curb appeal, safety, and value all received an immediate boost. Arizona Foundation Solutions continues to champion proactive repairs, helping families across Arizona—from Scottsdale to Sedona—secure their homes against the hidden threats below the surface.

The owners of this early 1990’s single-family home in Tempe, Arizona, reached out to us after discovering a crack in the concrete slab of their home. This crack was discovered when lifting tile to replace the flooring. The solution was to concrete crack stitch the concrete slab crack. The before and after photos of this amazing concrete repair speak for themselves. Arizona Foundation Solutions is categorized as one of the best concrete lifting companies down in Tempe, Arizona, not only for crack stitching repair!

In Tempe, Arizona, Anthony, our experienced foreman, led a project addressing stem wall repair for a family facing severe oxidation issues in their home's foundation. The stem wall exhibited alarming signs: flaking paint, cracks, and spalling concrete. These were clear indicators of impending structural instability, demanding immediate attention.

Traditional repair options like patching, epoxy injections, or rebar replacement offered only temporary solutions, prone to recurring oxidization and escalating costs over time. Even high-end solutions like electrical cathodic protection systems, though effective, were prohibitively expensive for residential use.

Thanks to Arizona Foundation Solutions, the family in Tempe, Arizona, can breathe easy knowing their stem wall is fortified against future corrosion threats. Employing a reliable and cost-effective stem wall repair system, our team ensured lasting structural integrity for the household.

Gone are the days of worrying about stem wall failure as our innovative solution provides enduring protection without breaking the bank. Anthony's expertise and our tailored approach addressed the root cause of the issue, offering a sustainable fix for stem wall problems.

The once-vulnerable stem wall now stands strong, free from cracks and spalling concrete, safeguarding the family's home for years to come.

In Tempe, Arizona, a homeowner reached out with concerns about visible cracks in their concrete foundation and floor. These issues were causing not only structural concerns but also potential safety hazards. Aly, our Customer Care Representative, scheduled a consultation for the homeowner with Victor, our Design Specialist, to assess the severity and source of the cracking.

Upon inspection, Victor identified that the cracks were likely due to settlement issues, a common problem in the region’s soil. To provide a durable and cost-effective solution, he recommended the Crack Stitching Repair technique, which utilizes high-strength carbon fiber laminates to reinforce and repair the cracked concrete.

Our certified team, led by Foreman Juan, prepared to execute this repair. Using carbon fiber in construction for foundation crack repairs offers remarkable strength without the need for heavy equipment. By employing materials like Glass, Kevlar, and Carbon Composites, which have been used in industries such as aerospace, we deliver a modern and resilient solution to homeowners experiencing similar issues.

Project Solution:

Solution: Arizona Foundation Solutions, certified in HJ3 Composites’ installation techniques, offers Crack Stitching Repair services that efficiently restore the integrity of cracked foundations and concrete floors. Unlike traditional methods involving steel dowels, our carbon fiber stitching system offers a quick and minimally invasive process. The steps include:

Cutting the crack into non-parallel slots in the concrete.

Installing high-strength carbon fiber laminates within the cuts.

Filling the area around the laminates with a low viscosity polyurethane for stability.

Smoothing the surface to ensure a seamless finish.

This method restores the concrete to a strong, reinforced state, extending its durability for years to come and maintaining a smooth, level surface.

After Project Description:

After the repair was completed by Juan and the Arizona Foundation Solutions team, the Tempe homeowner was thrilled with the results. The crack stitching solution not only resolved the immediate structural issues but also reinforced the concrete to withstand future settlement. By integrating high-strength carbon fiber and low-viscosity polyurethane, the repair was effective and efficient, leaving minimal disruption to the homeowner’s routine. The repaired foundation looked smooth, and the durability of the repair ensures lasting peace of mind.

Our Crack Stitching Repair solution showcases the advanced use of modern materials like Glass, Kevlar, and Carbon Composites, making it ideal for concrete slab foundations with cracks caused by structural shifts. This Tempe project exemplifies how we harness innovative technology to address common construction challenges, providing reliable, long-lasting results for our clients.

The homeowner of the 1970’s ranch became very worried about her house. The stem wall of her home began to crack and flake. On top of the stem wall, She noticed drywall cracking and tiles popping up. Our outstanding crew made the stem wall look brand new. They then used PolyLEVEL fix problems on the inside of the house. Arizona Foundation Solutions is the best cracked concrete repair company at Scottsdale, AZ!