Before & After Photos

Crawlspace support blocks were failing in Divernon, IL, causing the floor above to sink. To solve this issue, the SmartJack System was installed. These are steel support systems that can permanently stabilize and level the floor joists and girders in a crawlspace. These add strength and stability to the existing columns and piers. They are unaffected by moisture, as they will not rust, weaken, or be affected by mold. These will lift the floors above back toward their original position, reduce floor “bounce” caused by excessive joist spans, and solve the problem once and for all!

A driveway was settling in Jefferson City, MO, causing the slabs to sink into the ground. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. Thanks to these systems, this driveway will remain level and even for years to come!

A concrete driveway was sinking in Hermann, MO, causing a step to form where it meets the garage. To solve this issue, the PolYLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the driveway and restore peace of mind for years to come!

A sidewalk was sinking in Bourbon, MO, causing the slabs to become uneven and crack. To solve this issue, the PolyLevel System was first installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the concrete and restore peace of mind for years to come!

David C. of Warrenton, Missouri had a sinking floor in his garage and a cracked concrete porch, so he decided to call woods Basement Systems. Systems design specialist, Peter N. recommended installing PolyLevel.

Foreman, Matthew R. installed the product. PolyLevel is made of a polyurethane formula that expands underneath the concrete to lift it back to its original position. It works to permanently lift and stabilize sinking concrete slabs. How it works is first, small holes are drilled into the concrete slab and then the polymer is injected into the void. The holes are then covered with cement and within 15 minutes of installation, the concrete can be used again.

Now David C. can enjoy his safe garage and porch again.