Before & After Photos

A concrete driveway needed to be leveled in Wentzville, Missouri. Woods came out and installed the PolyLevel System to restore the slabs to their previous condition. This system consists of a highly durable foam that is injected directly beneath the concrete. As it sets, the foam lifts the concrete back up to its original position. With this installation in place, this driveway is sure to stay level for many years to come.

A driveway was sinking in Wentzville, MO, causing a large and uneven step to form where it meets the garage. To solve this issue, the PolyLevel System was first installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the concrete and restore peace of mind for years to come!

A concrete garage floor was sinking in Grubville, MO, causing separation between the wall and floor. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slab with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will restore the peace of mind of the homeowners for years to come! 

Customer, Judy of Elsberry, Missouri, had an issue with the pavement in her driveway: it was pulling away from the home's foundation. Not knowing what to do, she called woods Basement Systems for help. Systems design specialist, Brandon B., recommended PolyLevel for the job.

Foreman, Andrew T. did the job. PolyLevel works to permanently lift and stabilize concrete slabs with a high density polyurethane formula, or foam. Small, dime-sized holes are drilling into the pavement and then the polymer is injected into the void. The holes are covered with cement and the concrete can be used within 15 minutes.

So Judy H. can now safely use her driveway. 

This before and after shows images of a concrete sidewalk before we restored it with PolyLEVEL. The cracking, uneven concrete is an indicator that a PolyLEVEL restoration is needed.