Before & After Photos

A sidewalk surrounding a patio was sinking in Lake Saint Louis, MO, causing the slabs to become uneven and a tripping hazard. To solve this issue, the PolyLevel System was first installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the concrete and restore peace of mind for years to come!

A concrete sidewalk was sinking in Lake Saint Louis, MO, causing the slabs to become uneven and pose a tripping hazard. To solve this issue, the PolyLevel System was installed. This foam-like material was injected into the slabs and will expand, lifting them back up to their original position. This will restore the mind of the customers for years to come!

A concrete floor was cracking inside of a home in Defiance, MO, so the PolyLevel System was installed. This will stabilize, lift, and level the concrete slab with high-strength polyurethane foam. This is a unique approach to repairing sinking concrete.  After drilling small holes into the concrete, a polymer foam is injected into the concrete slab to stabilize the surface. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up for good!

Heather of Saint Albans, Missouri experienced sinking concrete slabs on her patio so, she decided to call Woods Basement Systems for help. Upon further inspection, systems design specialist, Peter N., found a solution and recommended PolyLevel for the job.

Foreman, Andrew T., installed the PolyLevel. PolyLevel is a high density polyurethane formula that permanently lifts and stabilizes sinking concrete slabs. First, a small, dime-sized hole is drilled into the concrete and then the polymer is injected. After that the hole is covered up with cement, so there is no worry of mismatched slabs.

Heather Z. can now enjoy her patio!

A concrete patio was sinking in Wildwood, MO, causing the slabs to crack and become severely uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the patio and restore peace of mind for years to come!