Before & After Photos

Tom and Debbie of Doe Run, MO noticed some of their concrete steps were uneven and were cracking. They wanted to prevent further cracking and damage, so they called Woods Basement Systems. Once it was concluded that their concrete steps needed PolyLEVEL injection, Woods Basement Systems sent their foremen, Joshua B. to inject PolyLEVEL.

After penny-sized holes were drilled into selected concrete slabs, Joshua worked to inject PolyLEVEL under the slabs. The entire process took a little over an hour to complete, and Tom and Debbie were extremely satisfied with the results.

Geraldine B. of St. Charles, Missouri was concerned with her cracking, uneven walkway. The cracking and uneveness was a safety concern for her visitors.

PolyLEVEL is the perfect solution to restore uneven walkways to a safe position. PolyLEVEL is quick and will not wash away, so Geraldine does not have to worry about having unsafe walkways.

Homeowner, Carl W. was worried about the unleveled concrete in his driveway so he gave Woods Basement System a call. 

Our system design specialist, Matthew S. did an inspection on the home and created a design that would level the concrete. Foreman, William T. did a PolyLEVEL system installation. Rather than a concrete and mud mixture, high-density foam is injected to level the concrete. This system also has quicker cure time than other repair options. 

In the picture above, you can see that PolyLEVEL is the best solution.

A concrete patio in Saint Charles, MO was sinking, causing the slabs to become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will restore peace of mind for years to come!

A concrete driveway in Saint Charles, MO was settling, causing the slabs to sink and become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. NexusPro Joint Sealant was also used to seal the joints and cracks in the concrete. This will provide long-lasting flexibility and will stand up to harsh weather conditions. This will restore peace of mind for years to come!