Before & After Photos

Click on a photo to enlarge.

Sidewalk Repair In Webster Groves, MO

A concrete sidewalk in Webster Groves, Missouri, was becoming uneven due to moving ground soils and needed to be addressed. Woods came out and installed the PolyLevel System to address the concerns. This system consists of a highly durable foam that is injected directly beneath the concrete. As it cures, this foam lifts the concrete slab back up to its original position. This system often outlives the concrete it is installed to support, ensuring this sidewalk will stay level for decades to come.

Oakville, Missouri Driveway Aligned with PolyLEVEL

Homeowner Jim B. of Oakville, Missouri, was displeased with the cracking, uneven concrete of his sidewalk and driveway. The sinking driveway slab created a small ledge as he drove into his garage and he worried of the damage it may cause to his vehicle over time.

System design specialist Jeremy R. designed an effective solution to correct the unlevel, cracked concrete. Foreman Andrew T. and his crew used PolyLEVEL injections to raise and level the concrete, and sealed the cracks. PolyLEVEL is both quick and long lasting, so Jim can have a beautiful, safe driveway for years to come.

PolyLevel Evens Out Concrete in St. Louis, MO

Joyce C was concerned about the uneven concrete in front of her home. So, she decided to call Woods Basement Systems. System Design Specialist David D was able to come up with a solution to the problem.

Foreman William T used PolyLevel to raise the level of the sinking concrete. PolyLevel is injected into the ground and will raise the level of the sinking concrete. The injection will leave behind a dime sized hole, which will be filled in with concrete.

PolyLevel Fixes Patio in St. Louis, MO

Jim B was concerned when he noticed about the cracks on his patio. So, he decided to call Woods Basement Systems. System Design Specialist Jeremy R was able to come up with a solution to the problem.

Foreman William T used PolyLevel to even out the concrete. PolyLevel is injected into the concrete and will raise the level of the concrete and fill in the cracks. The injection leaves behind a dime sized hole that will be filled in with concrete.

PolyLevel in St. Louis, Missouri

Steve of St. Louis, Missouri experienced uneven pavement in his driveway, so he decided to call Woods Basement Systems. Systems design specialist, Phillip H., recommended installing PolyLevel. 

Foreman, Andrew T. worked the job. PolyLevel is a high density polyurethane formula or foam that works to permanently lift and stabilize sinking concrete slabs. How works is first, small, dime-sized holes are drilled into the concrete. Then the polymer is injected into the void and in about 15 minutes the concrete is usable, so there is no waiting for it to settle.

Steve L. can now safely use his driveway.