Before & After Photos

A foundation was becoming unstable in a Saint Louis, MO basement, as it was shifting and leaking water. To solve these issues, the PowerBrace System was first installed. This will permanently stabilize the foundation and eliminate any further inward movement. This will also reverse the effects of wall failure, straightening the walls to their original position and closing the cracks to prevent water leakage. Additionally, the BrightWall Paneling System was installed. This bright, clean, and durable wall system will prevent water vapor from permeating the basement walls and will drain any wall leaks to the WaterGuard System, which will then direct this water to the sump pump. Thanks to these systems, this basement will remain stable, dry, and clean for years to come!

Support beams were failing in a basement in Saint Louis, MO, as they were shifting and cracking and causing the floor above to slope. To solve this issue, the SmartJack System was installed. These are steel support systems that can permanently stabilize and level the floor joists and girders in a basement. They are unaffected by moisture, as they will not rust, weaken, or be affected by mold. These will lift the floors above back toward their original position, reduce floor “bounce” caused by excessive joist spans, and solve the problem once and for all!

A foundation was settling in Saint Louis, MO, causing the front porch to sink and crack. To solve this issue, the Push Pier System was installed. These will permanently stabilize the foundation, and in many cases, lift it back toward its original position. These can also close the cracks This is the least risky solution when the soil conditions are unknown. There is minimal disturbance from installation; installing them is a quick process and will solve the problem once and for all!

Support beams in a basement in St. Louis Missouri were failing to hold the weight of the house above and needed to be replaced. Woods installed a SmartJack System to solve the issue. SmartJacks are galvanized steel beams installed to reinforce existing support beams that are failing. Thanks to this installation, this basement will remain sturdy for years to come!

A basement in St. Louis, Missouri, had some supports that were starting to fail due to foundation settlement. This was causing the floors above to sag and needed to be addressed right away. Woods came out and installed the SmartJack System. This system consists of custom cut steel beams. They are placed in galvanized fill to equally distribute the weight of the building. They can be tightened over time. This allows maintenance to be done as the ground continues to shift without requiring another costly install. Thanks to the SmartJack System, this building will be stabilized for years to come.