Before & After Photos

Mildew was a recent concern for a client out in Lawrenceville, IL.  The client was concerned with the high humidity lingering in the crawlspace, along with a damp floor that was slowly causing mildew to grow. The mildew appeared in closets on the main floor above.  The crawlspace was open, which created humidity and moisture in the air of the crawl space. When it is open, bringing in continuous moisture, it affects the energy that is being lost. 

Controlling air infiltration is the key to energy conservation in a building.  The top priority is to close up the giant holes in a crawl space wall while also eliminating the reason, such as exposed damp earth, that those holes were put there in the first place.  A crawl space vent was used to permanently cover the outside, and to stop unwanted outside air from entering the crawl space.  Encapsulation also helps the crawl space by sealing the floor from air leaks, and since problems in a crawl space need to be permanently fixed, it was added.  A closed crawlspace and encapsulation will conclusively end the cycle of mildew from the floor above. 

This Lawrenceville, IL homeowner had concerns that his crawl space was wet, humid, mold-prone, and had a failed sump pump—posing risks of flooding and structural damage.

We installed a SmartSump pump with IceGuard, StarPipe drainage, and LawnScape outlet, added a SaniDry dehumidifier, performed fungus remediation, reinforced damaged joists, sealed vents, and encapsulated the space with CleanSpace liner and drainage matting. The crawl space is now dry, protected, and structurally sound!

Here, you can see the old sump pump system before the installation team replaced it.  The pump does not have a lid, which created a bad situation--when the pump became overwhelmed, it simply allowed the water to pour out on top of the liner!

In the second picture, you can see that the installation team has completed the installation of a cast-iron Zoeller® sump pump with a reliable liner, a sump alarm, and a battery back up system.  The SmartSump and the CleanSpace are designed to fit together in a way that keep moisture in the pump, not on top of the liner.

Sharon B. of Princeton, IN, had a damp, wet, leaking crawl space that could not keep water and moisture out. Sharon needed a solution in order to keep her crawl space dry, mold-free, and would save her money on her electric bill.

Healthy Spaces installed a system that would keep her crawl space dry and mold free. We installed CleanSpace® vapor barrier, SilverGlo™ insulation wall panels, SaniDry Sedona dehumidifier, an EZ Flow Drain which will direct water to the SmartSump pump system. Outside Healthy Spaces installed IceGuard and a LawnScape outlet at the end of the discharge line.

Our customer contacted us to encapsulate his crawlspace as well as do mold remediation! Our customer knows the importance of encapsulation as it helps with sealing the earth from the comfort of your home. Encapsulation creates a dry and controlled environment which helps with moisture, mold , pests and poor air quality!

Our solution to help our customer is we installed clean space which is a 20 mil thick polyester plastic liner to seal off the home from the earth. The liner will last as long as your home. This clean space liner prevents water from permeating up from the floor from the soil. As well as also draining from the floor to the sump location. We installed a Smart Sump Pump System that has an airtight lid, a wired alarm, and comes with a drain that drains water from top of the clean space liner. We also installed our Sedona dehumidifier.