Before & After Photos

A homeowner from Eden Prairie, MN, had noticed that his front walkway had begun to sink. There were various portions of the walkway that were uneven, resulting in dangerous trip hazards. The homeowner didn't want the safety of his home to be compromised, so he began to look for a concrete leveling service in or around Eden Prairie. He quickly found American Waterworks and was impressed with our reviews in his area. He decided to claim his FREE estimate, and several weeks later, our Design Specialist, Mitch S, was out at the home. 

Mitch completed a comprehensive evaluation on the sinking walkway. Once he completed his inspection he informed the customer that American Waterworks could fix the sinking concrete with the use of our PolyLevel injection. Mitch went on to explain that our PolyLevel is a polyurethane foam that expands after its injected below an uneven slab. As the foam expands the uneven concrete is slowly pushed back into place, restoring the look and safety of the slabs. Mitch went on to say that no concrete project is complete without our NexusPro, a silicone-based sealant that gets applied to the cracks and joints of the concrete after the concrete has been lifted. It's specially formulated to to provide long-lasting flexibility and to stand up against harsh weather, protecting the soil below your slabs. The homeowner was thrilled with Mitch's solution and decided to move forward with the project. 

A little less than a month later, our Foreman, Pat B, was out at the home to lift the slab. Once the project was completed, our customer was thrilled with the look and safety of his new and improved concrete walkway! 

Do you have uneven concrete? You don't need to live with it! Claim your FREE estimate today and restore your concrete! 

A homeowner in Eden Prairie, MN, got in touch with us when he decided to do something about his uneven walkway leading up to his patio. Not wanting any guests to take unwanted spills, he decided to take advantage of our FREE estimates, and a few weeks later, our Design Specialist, Mitch S, headed out to the home to inspect the concrete. 

Once Mitch completed his walkthrough, he met with the homeowner to deliver his recommendation. Mitch informed the homeowner that the problem could be fixed by installing our PolyLevel. PolyLevel is a polyurethane foam that expands when injected beneath sinking concrete slabs, filling voids left over by soil erosion and slowly lifting the concrete back into place. He went on to say that we finish all of our PolyLevel installation our NexusPro. A silicone-based sealant, NexusPro gets applied to all cracks and joints in the problem slab to prevent any unwanted moisture from getting beneath the slab to the soil below. The homeowner agreed and work was scheduled to begin a few weeks later. 

On the day of the installation, our Foreman, Troy J, was able to complete the lift to the costumer's satisfaction. Now our customers can host friends and family without worries of potential trip hazards! 

Do you have a section of concrete that needs attention? Click HERE for your FREE estimate! 

A homeowner in Saint Michael, MN, was concerned about the unsafe concrete walkway leading to his front door. The uneven concrete posed a dangerous trip hazard for him and his family, so he began looking into "concrete repair" in the area and found us. After browsing through our website and becoming impressed by our concrete repair before and after photos, the homeowner contacted us to schedule their FREE estimate!

In less than a week, we sent one of our Design Specialists to the home. After inspecting the concrete walkway, our Design Specialist created a solution using our PolyLevel foam and NexusPro sealant. The homeowner was pleased to learn that PolyLevel is a faster, quicker, and less invasive solution compared to traditional mudjacking and decided to move forward with the project.

In about a month, our Foreman, Troy J. and his crew drilled small holes into the concrete where to foam needed to be injected. Then, they carefully injected the foam until the concrete slabs were raised and leveled with each other, therefore eliminating the trip hazard. Once they finished raising the walkway, they sealed the cracks with our NexusPro sealant to protect the concrete, and give it a beautiful, finished look! The process only took a few hours to complete, and now our customer can enjoy a beautiful, safe walkway for years to come.

Experiencing a sunken or uneven walkway? Contact us today to schedule your FREE estimate with a concrete repair expert!

Lee and Betty O. of Medina, MN had cracked concrete on their porch and wanted it repaired rather than replaced. After doing some research on our website and getting a hold of us for a FREE Estimate, our Design Specialist, Rick Weber, went to their home to inspect the problem and come up with a solution. Lee and Betty were content with Rick's concrete repair proposal, so they went ahead with the project. 

Our Foreman, Troy Johnson, and his production team began the project by injecting our PolyLevel underneath the concrete to stabilize and raise it's surface. Next, our team applied our NexusPro on the cracks to prevent any further bubbling or cracking. It gives the concrete and nice, clean look and provides long-term flexibility. The work was completed within a couple hours, and Lee and Betty were able to use their concrete that same day! They were thrilled with the outcome. 

Wajih from Hamel, MN, got in contact with us when they began to notice that a gap forming between their front stair and the concrete walkway leading up to it. They were afraid that if they didn't correct the issue, it would begin to worsen and the tripping hazard would get worse. When they called us, we set them up with our FREE inspection. After our inspection visit was scheduled, our Design Specialist, Jarrett, headed out to the property for a standard 3-hour inspection into the issue and what we could do to help. Once he completed his walkthrough, he made some recommendations as to how we could best help Wajih. First, Jarrett wanted to lift and level the concrete slabs using our PolyLevel injection. Then he wanted to follow up and seal the project with NexusPro to seal off any remaining cracks. The homeowner agreed and work began shortly after. 

Our team, led by our Foreman, Dylon, began the process by strategically drilling holes into the problem slabs. Next, they injected the PolyLevel into the holes and monitored the raising process. Our PolyLevel is an expanding polyurethane foam that, when injected below concrete, fills the voids below the slab caused by soil erosion. Next, they followed the PolyLevel with our NexusPro, a silicone-based sealant for joints and cracks that is specially formulated to provide long-lasting flexibility and to stand up against harsh weather conditions. 

When the job was complete, Wajih was content knowing that their concrete slabs wouldn't be sinking anymore anytime soon!