Before & After Photos

Do your basement walls and floors cry every time it rains? Make them happy and dry again with our waterproofing designs. With over 37 years of installing waterproofing systems, we have seen it all and know what's best for your home. Our advice is also completely free, so schedule an appointment with one of our inspectors today!

Hydrostatic pressure is the most common issue for basements that we see. When your foundation was first built, the builders have to dig up soil around the foundation and then have to backfill back around that foundation with the same soil. Because the soil was dug up, it's not as compact. This creates a clay bowl effect around your home, where water is more inclined to saturate the soil around your foundation because the soil was once broken up. With all this water sitting on the outside of your foundation, it creates a tremendous amount of pressure on the walls. In order to relieve this water pressure, we installed an interior waterproofing system that invites the built up water into the sump pump, and then the sump pump discharges that water far away from the home. We then installed PowerBraces on the bowed wall to make sure the wall is stabilized for good. Lastly, we installed BrightWall panels to cover up the stained block walls.

This specific corner of the basement was leaking heavily for this homeowner. You can see from the before picture that the walls were deteriorating from the intruding water, and this was frustrating the homeowner. We installed our patented interior perimeter waterproofing system with the most effective products like; A TripleSafe sump pump, CleanSpace moisture proof walls, and WaterGuard subfloor drains. This waterproofing system helps bring a peace of mind to the homeowner that their basement is protected from water.

This homeowner wanted us to help stop mold from growing in their crawl space. We waterproofed, then encapsulated with a moisture barrier, then sealed out the old vents, then we installed a world class dehumidifier. Mold will no longer grow in this crawl space. 

This crawl space had pools of water sitting at the bottom every time it rained. These pools of water were causing mold and moisture issues, which were tearing away at the insulation and wooden frames. In order to fix this, we installed a drainage system made of perforated pipes backfilled with gravel along the interior perimeter of the crawl space. These drains were hooked up to a SmartSump sump pump. We then covered the whole crawl space in Clean Space liner, which is made of non organic material. Thus way mold can never grow on it. We then installed a SaniDry Sedona dehumidifier, which is able to eliminate air moisture issues. We also installed a Turtl crawl space entry door, which is not shown in the pictures.