Before & After Photos

Alfred called us becuase his driveway was sinking in multiple spots. It casued trip hazards and with driving on it, the driveway was just getting worse. We injected PolyLevel Foam to lift up and level the concrete. PolyLevel is very lightweight but strong enough to hold up concrete with heavy loads like vehicles on it. It is also waterproof so that the rain won't wash it away. PolyLevel also has a very quick curing time so you can drive or walk on it within about 15 minutes of it being injected!

We do many PolyLevel jobs because the concrete is resting on poor foundation soil. However, this is not always the case. If you have read any basement job that we've written about, you know about how damaging water is to concrete, brick, and stone. So when water reoccurs on a slab of concrete, the slab will move around a lot. This homeowner has the downspout from the roof leading straight onto the walkway, which in return has made the walkway unlevel. We did two things to fix this problem permanently. First, we fixed the downspouts by adding buried downspouts which will direct the water away from the home and away from the walkway. This will also be more discrete because it is underground.

Next, we installed our advanced polymer injection foam, PolyLevel. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

Richard and Lisa called us because the concrete slabs that made up their driveway were shifting and separating. The driveway was sinking lower than the garage and, when it rained, sand would come through the gaps between slabs.

A quick PolyLEVEL injection brought everything back into the right place, making the driveway safe for cars and feet alike.

Kevin called us because his walk ways to the house were unlevel. They had been sinking for a couple years but they were pretty bad and causing a tripping hazzard. We injected PolyLevel Foam to lift the sunken concete slabs and level out the walk ways. PolyLevel is a light weight foam that lifts up concrete slabs but strong enough to hold up under heavy loads on the pavement. It is waterproof and won't reacts with soil or moisture so that it won't wash away of degrade. The foam also has a very quick curing time of about 15 minutes so that you can walk or drive on it soon after the injection is complete.

Beth L., from Ada, MI was experiencing a cracked floor square near a foundation support for her enclosed porch. She was worried water would begin seeping through the crack and that it would continue to grow. After pricing replacement of the floor, Beth knew this wasn’t the right solution for her. Seeking an equally effective and affordable concrete repair solution, Beth contacted us.

Our concrete leveling expert Ty Azevedo carefully assessed the faulty floor square in Beth’s enclosed porch. He proposed the option of using our specially formulated Poly Level product to return the floor to its original position. Ty and Beth worked to create the perfect Poly Level plan for her. Poly Level provided our friend Beth with a permanent waterproof solution and eliminated her worries. Let us help you too, call today for your free repair estimate.