Before & After Photos

A homeowner in Rochester, MN, had noticed that the concrete slabs around their home had begun sinking. Concerned about the safety risks, the homeowner contacted us and scheduled their FREE estimate.

In less than a week, our Design Specialist, Nate C., arrived at the home for the inspection. During the inspection, he took a close look at the troubled concrete slabs and recommended lifting them with PolyLevel, our foam-expanding solution, and NexusPro, our silicone-based sealant to seal off the joints. After reviewing the proposal and becoming confident in our TEAM, the homeowner decided to move forward with the project.

In about a month, our Foreman, Troy J., and his crew arrived at the home for the installation. Once all the slabs have successfully been lifted and leveled, the crew shifted their attention and applied NexusPro along the joints.

Now, our customer can have peace of mind! Noticed sunken slabs around your home? Click HERE to schedule your FREE estimate today!

Joe B. in Rochester, MN noticed that after the seasons changed from winter to spring, his driveway had sunk. Causing an uneven surface from his driveway to his garage. Joe started to research concrete repair contractors and he came across our PolyLevel foam injection solution on our website.

He was interested in learning more about it to see if it was the right fit for his needs. Our Design Specialist, Rick Weber, went onsite to do a FREE estimate for him. Joe was pleased to find out that our PolyLevel foam injection is a more affordable and faster solution than traditional concrete repair, while still being durable. 

The foam injection took a couple of hours and Joe was able to see the transformation right away since our PolyLevel cures within 30 minutes of the injection. Joe no longer has to worry about the safety hazard of uneven concrete. 

If you are experiencing uneven concrete, click here for your FREE estimate!

Neal in Rochester, MN was tired of the trip hazard that his sunken concrete had created. His driveway had sunk about two inches below the concrete floor of his garage, so he decided it was time to look into concrete repair. He discovered American Waterworks and was interested to learn more about our PolyLevel concrete repair solution, so he contacted us to receive a FREE estimate. We sent one of our Design Specialists, Kevin McWithey, to his home to inspect his concrete and develop a solution. Neal was pleased to learn that our PolyLevel foam injection is an effective, quick and more affordable alternative to traditional concrete repair, so he scheduled the project.

Our PolyLevel experts, Jared Wroblewski  and Trevor Ellingson, drilled penny-sized holes into the concrete slabs where they needed to be raised. Then, they injected the polymer foam until the concrete became completely level with the garage floor. The process only took a couple of hours and Neal was very pleased with the results! He won’t have to worry about a trip hazard for years to come!

Do you have sunken concrete? Click here to receive a FREE estimate!

Kerry I. in Rochester, MN contacted American Waterworks after being referred to us by a previous customer. Her driveway was sinking, and she had some cracks in the concrete that she wanted sealed. We sent one of our Design Specialists to evaluate the concrete and propose our PolyLevel concrete repair system. Kerry was impressed with our products and moved forward with the project. 

Our Foreman, Troy Johnson, and Co-Foreman, Chris Schomaker, drilled small holes throughout the concrete slabs that needed to be raised. Next, they injected the foam into the holes until the slabs were raised back to their original position. They covered up the holes with concrete and then sealed the cracks in the concrete with our Nexus Pro sealant. Kerry was pleased with the outcome and happy with how quick and non-invasive the project was. 

Do you have uneven concrete? Click here to receive a FREE estimate!

Peter and LeeAnn from Rochester, MN noticed that the sealant connecting their steps was drying and cracking. Peter and LeeAnn were worried that water could seep through the joint affecting the steps. They contacted American Waterworks to schedule their FREE estimate. This entitled them to a free home inspection by one of our Design Specialists. Once an appointment was set our Design Specialist began to conduct a thorough home inspection, after the inspection, the Design Specialist recommended that Peter and LeeAnn invest in our NexusPro Solution. The NexusPro solution is a silicone-based solution that allows the sealant to expand and condense along with the concrete through the seasons. The NexusPro solution also has a UV protectant to prevent the sealant from cracking and drying. Peter and LeeAnn were satisfied with the solution and scheduled date of installation. 

Our Foreman and his Production team then arrived at the property and began the project by cleaning the joint and the sealant that was left. Once cleaned, the team then injects the NexusPro solution. Peter and LeeAnn loved the new look and were satisfied with the outcome of the project. 

If you are experiencing a similar issue and want an upgrade, contact American Waterworks today and schedule your FREE estimate!