Before & After Photos

Brock wanted the concrete raised around his home. He knew that the uneven slabs were tripping hazards, and didn't like the curb appeal of his concrete. The concrete was settling in different directions, which was caused by soil settlement over time. The joints of the concrete were also not sealed, allowing rain and moisture to penetrate beneath the concrete causing further settling and cracking. After the initial inspection, and proposal, Brock noticed more settling around the backside of his home. He was able to call our System Design Specialist, Brock, to talk about another solution to the new settlement in the back. 

For this project, PolyLevel foam was used. PolyLevel foam works better than mudjacking, as the foam compacts the soil beneath, while lifting the existing concrete slabs. NexusPro was then used to seal the joints, to prevent rain and moisture from getting under the concrete. All of our concrete projects are backed with a 5-year warranty. Brock can now rest easy that his concrete won't cause tripping hazards any longer. 

Homeowner, William L. in Council Grove, KS, noticed his walls cracking due to sinking concrete.  He wanted to fix the problem before it got worse and increased the cost to repair.

We sent System Design Specialist, AJ, to the home to provide a free, same-day estimate.  We were able to use Polylevel to lift and level the sunken concrete and applied NexusPro to seal the cracks in the areas where the concrete began to break.  With our repair solution, we were able to protect the concrete and walls from further damage.

Mary K. is a homeowner in Columbus, NE and was frustrated with the concrete in front of her garage. It had settled over time creating a large drop off from the garage floor to the driveway, making it an extreme tripping hazard. With grandkids learning how to walk, she knew it was time to have it repaired. She chose Thrasher because she was familiar with our concrete repair solutions and knew it would be a fraction of the cost of having it replaced.

To begin the concrete leveling project, System Design Specialist Jesse White arrived at the home in Columbus to inspect the driveway. Jesse determined the concrete had settled in front of the garage due to soil washout underneath from water seeping in through the control joints. To repair this, Mary chose to have Thrasher install our 2-Part Concrete Protection System. Our PolyLevel concrete lifting foam is installed first by injecting underneath to permanently level the surface with the garage. NexusPro sealer was then applied to all cracks and control joints to prevent any water from creating issues long into the future.

Mary couldn’t have been more pleased with the outcome of the project. Thrasher was able to provide her a solution for a fraction of the cost of replacing the driveway. She now has peace of mind when her grandchildren visit and utilize the front of the house.

Darlene L. is a homeowner in Manhattan, KS, and had watched her front walkway settle severely over the years. With winter right around the corner, she wanted to have the concrete repaired to restore her peace of mind. Familiar with Thrasher and our extensive reputation, she gave us a call to provide our concrete repair solutions.

System Design Specialist Sheldon Sharp arrived at the home in Manhattan, KS, and performed a full inspection of the home’s front walkway. It was determined that soil washout underneath the walkway caused it to sink, making the front step very tall and unsafe. To resolve this, our crews installed our 2-part concrete protection system to lift, level, and seal the settled slabs.

This homeowner in Manhattan, KS, had become concerned with the cracks and settling on her driveway. They didn't water to seep through the cracks and infiltrate the foundation, a problem we often see. After several bids, they chose Thrasher because of our unparalleled professionalism and attention to detail.

Our crews arrived at the home in Manhattan and immediately went to work installing our 3-part concrete protection system. First, our PolyLevel foam was installed by injecting it underneath all uneven areas to permanently lift and level each slab. NexusPro crack filler was then applied to all cracks and joints to seal off the surface and protect against water damage. Lastly, SealantPro was sprayed onto the entire surface to repel water and prevent surface stains.