Before & After Photos

Earl W. is a homeowner in Danbury, IA, and was frustrated with the appearance of his beaten driveway. Instead of replacing it, he wanted to have it permanently repaired to increase the curb appeal and value of the home. After speaking with our System Design Specialists, it was apparent to Earl that our products are superior and backed by an industry-leading warranty.

Our team arrived at the home in Danbury, IA, and immediately went to work installing our 2-part concrete protection system. They began by injecting our PolyLevel foam underneath the concrete slabs to lift and level the surface. Then, NexusPro is applied to all the cracks and control joints to prevent any water from breaching the surface into the future.

Earl couldn’t have been more pleased with our concrete repair solutions. He was relieved not having to replace the entire driveway and was delighted throughout his Thrasher experience. 

This Remsen, IA driveway sank after a sever rainstorm washed out a large section of the retaining wall and took the soil underneath with it. The drop off from the garage to the driveway was over three inches tall and made it extremely difficult to pull cars in. Without hesitation, they gave Thrasher a call to find a concrete repair solution.

 Our System design Specialist, Dustin Brunsting, arrived in Remsen to evaluate they sunken area. The homeowners thought it wasn’t going to be fixable, but Dustin was positive our PolyLevel foam would restore their driveway back to its original state. Our team arrived and carefully injected the PolyLevel foam underneath the concrete to permanently lift and level the driveway.

 The homeowners were more than pleased with the effectiveness of the solution we provided. This is a perfect example of how our concrete repair services are a fraction of the cost compared to replacing.

The homeowner in Stilwell, KS was struggling with their concrete leading from the driveway up to the front steps. There was major settlement that had occurred and it was becoming a trip hazard. Worried that it would become worse and other parts would also start to settle, they decided to call Thrasher.

The crew was able to identify that major settlement had occurred because the soil underneath had washed away due to exposed joints. We used PolyLevel to bring the slab back up to the original level, getting rid of the trip hazard. Then to seal the joints we used NexusPro Joint Sealant to close up the exposed joints and prevent water from entering. The customer was extremely happy to never have to worry about tripping over their concrete again.

These front steps were sinking due to water getting underneath the concrete slab and making the soil swell. To permanently fix this problem, we raised the slabs back in place and then sealed the joint and cracks around the area. We used a polymer foam to raise the slab back up to help stabilize it. The foam is waterproof and is installed under high pressure which allows it to lift effortlessly. We then used a silicone joint and crack repair caulk to seal all cracks and joints. 

This driveway in Overland Park, KS had large joints that were allowing water to penetrate the concrete slabs. This can cause major damage to the driveway and can also harm vehicles. To fix this, we sealed the joints with NexusPro, a long-lasting and durable silicone-based solution.