Before & After Photos

After this repeat customer hired us for their basement waterproofing needs, they chose for us to restore their basement with our mold-resistant Total Basement Finishing (TBF) finished panels.

First, we removed the flooring around the perimeter as well as cut the wall to install our WaterGuard drainage system so that the basement would no longer leak. The customer wanted the ultimate protection for their beautiful basement, so they had us install our TripleSafe three-pump system, which includes a battery backup in the event of a power or pump failure.

Once the basement is no longer in danger from water seepage, we were able to put the basement back together again using our special inorganic wallboard called EverLast walls. These walls are guaranteed against water and mold damage.

The results are easy to see. After repairing the basement with the right materials, the basement is not only dry but is pleasing to the eye!

This customer had an existing sump pump but was looking to upgrade. We came out and installed a Super SumpPump with a Battery Backup. 

This was a repeat customer of ours. We had previously installed a sump pump in the customer's basement, and then a few years later, water started to appear in a different section. After further investigation, it was apparent that there were small hairline cracks on the foundation wall that allowed water to enter the basement when it rained. 

First, we had to take care of those hairline cracks, so we installed FlexiSpan. FlexiSpan seals cracks with a flexible urethane sealant that will stop water penetration. FlexiSpan is flexible and moves with the wall, which eliminates re-cracking on the wall. 

This customer's crawlspace was wet, moldy and in dire need of attention. We started here by removing the old insulation and doing a full mold remediation. Next, we added Silverglo insulated wall panels around the perimeter of the crawlspace. We then installed our Cleanspace drainage matting and Cleanspace liner, which will provide a barrier against moisture and water intrusion. We also installed a Supersump sump pump system, this system come with a liner, a cast iron pump, a pump stand and an airtight lid with a built-in floor drain and WaterWatch alarm system. Lastly, we installed a Sanidry Sedona dehumidifier to check the humidity levels in check.

A wet crawlspace or basement is not something any homeowner wants to deal with when they move into their new home and with this knowledge, this customer knew, before they could put their home on the market, they would need to correct the issue of a leaky crawl space.

After we sent our inspector to evaluate the crawl space, he saw that the customer already had a working sump pump in play, but there was no way for the water that was getting into the crawl space, to get over to the sump pump. Right away, he knew the solution to this wet crawlspace was our CleanSpace Vapor Barrier and our Waterguard. The Cleanspace will direct any water intrusion down to the WaterGuard, which will then direct that water over to their current sump pump to be pumped out of the crawl space.