Before & After Photos

The crawlspace of this Dyer, TN, home had inches of standing water under the house. This standing water was causing mold and a noticeable smell in the home. We completed a full crawlspace encapsulation, including installing a TripleSafe sump pump. This sump pump will remove the standing water from the house to keep the crawlspace dry and mold-free. 

The homeowner is happy with our work, stating that the musty crawlspace smell is gone from their home. 

This home in Humboldt, TN had a water issue that caused $8k-$9k worth of damage to their finished basement. They had mold issues and wanted to keep this space dry ALL THE TIME!  We installed our WaterGuard and now they have a dry space! 

The first solution to any basement water problems is a interior perimeter drainage system called WaterGuard. By capturing water from the walls and floor it drains into the sump and is pumped to the exterior.

As you can see, it is minimally invasive, as the floor has been restored to level following installation, with the access ports allowing for maintenance if required.

When you want your basement to remain dry ALL the time, then the answer is to install a Triplesafe Sump Pump system, with two discharge lines protected with IceGuards.

Working with the Drytrak above floor baseboard system to channel the water out of the room and into the sump liner, you can see it in action with this Before and After photo.

This basement was getting too much water and moisture in, and needed to be waterproofed. Now, with our WaterGuard Waterproofing System, DryTrak Two-Stage Waterproofing System, and a TripleSafe Sump Pump, no water drop stays in!