Before & After Photos

Severe Crawlspace Damage Was Causing Dangerous Floor Sagging

Jennifer H.’s home in Lonoke, Arkansas suffered from significant crawlspace-related structural issues that resulted in sagging, unlevel floors throughout the house. Multiple past contractors had attempted repairs, but the underlying problems were never properly addressed. The home had two layers of subflooring—the original layer was severely rotted, with OSB installed over it—and the floor joists were in rough condition. A failing full-length main beam, combined with years of uneven settlement the homeowners referred to as the “roller coaster” effect, caused doors to shift, floors to slope, and the structure to become increasingly unstable.

A Full-Length Main Beam Replacement and Precision Lifting Solved the Problem

The solution involved replacing the full-length main beam from beneath the home, a critical advantage because the beam was a flyover design and accessible through a reasonably tall crawlspace. Using the SmartJack® support system, the team stabilized and lifted the structure with precision, achieving up to 3 inches of lift on one side of the home and 2¼ inches on the other. Additional SmartJacks were installed in the beam replacement area to allow controlled movement and fine-tuning. The floors were carefully adjusted to the level that best aligned with the healthier upper subfloor layer, balancing structural correction with the homeowner’s request to minimize cosmetic damage and maintain door functionality.

Proper Crawlspace Methods Ensured Long-Term Structural Integrity

The success of this project depended on using the correct crawlspace repair methods rather than surface-level fixes. Working entirely from underneath preserved the home’s interior while addressing the true structural failures at their source. Despite a minor plumbing incident involving a damaged two-inch pipe, the installation progressed smoothly and delivered excellent stabilization results. The SmartJack system allowed precise control over lift and load distribution, ensuring the home was leveled according to the homeowner’s goals rather than forcing a one-size-fits-all solution. The result was a safer, more stable foundation and a homeowner who was confident the repair would protect their investment for decades to come.

If your home has sagging floors, sticking doors, or crawlspace damage that previous repairs haven’t solved, it’s time for a structural solution. Contact us today for a professional crawlspace inspection and customized stabilization plan designed to permanently protect your home.

When Tricia B. in Horseshoe Bend, AR noticed cracking near her walk-out basement and a sunken front walkway, she knew it was time to take action. With plans to move back to Iowa and eventually put her home on the market, she didn’t feel right listing it without first addressing these issues.

Our team stepped in with the Lentil Repair System to stabilize two key structural areas, and we used PolyLevel® foam injection to lift and level the settled concrete walkway. We also sealed all visible joints and cracks to prevent further damage. The results speak for themselves—check out this incredible transformation!

Thinking of selling your home but worried about cracks, sinking concrete, or structural issues?   Let us help you protect your investment and give future buyers peace of mind. Contact us today for a free inspection!

This customer had severe cracks in her exterior wall.  This was due to foundation failure. The team at RedeemersGroup was able to use Push Piers to not only stabilize this home but also lift it back into place and close the crack significantly!

Ken F. was having trouble with his home in Batesville, AR.  His porch was settling, sagging, and pulling away from his home.  Ken knew the problem would only get worse with time, so he called on Redeemers Group!  Kurt, our pro inspector went to Batesville to give Ken a free, no-obligation inspection and to provide him with a permanent solution.  Kurts plan was to install helical piers around the porch.  Helical piers are ideal for this job because they are designed to go deep into the ground with minimal disturbance of the surrounding soil.  This would provide stability and possibly lift and level the porch back into its original position.  Ken was impressed with the solution and the work was scheduled. Foundation expert Chet and his crew installed the piers and were not only able to stabilize the structure, but lift it nearly two inches and permanently back into place.  Ken was overjoyed with the results of this job.  That is what drives Redeemers Group as a company, to go above and beyond expectations and provide remarkable experiences!  Call or Click if you are experiencing problems like this!

Ken F. was having trouble with his home in Batesville, AR.  His foundation was settling, causin a wall to crack and buckle.  Ken knew the problem would only get worse with time, so he called on Redeemers Group!  Kurt, our pro inspector went to Batesville to give Ken a free, no-obligation inspection and to provide him with a permanent solution.  Kurts plan was to install helical piers around the foundation.  Helical piers are ideal for this job because they are designed to go deep into the ground with minimal disturbance of the surrounding soil.  This would provide stability and possibly lift and level the wall back into its original position.  Ken was impressed with the solution and the work was scheduled. Foundation expert Chet and his crew installed the piers and were not only able to stabilize the structure, but lift it permanently back into place.  Ken was overjoyed with the results of this job.  That is what drives Redeemers Group as a company, to go above and beyond expectations and provide remarkable experiences!  Call or Click if you are experiencing problems like this!