Before & After Photos

This before-and-after photo set highlights a concrete step and landing repair in Pleasant View, Utah, where settlement had caused uneven elevation between the lower slab and the step above. Soil movement beneath the concrete created separation at the joint, increasing the risk of tripping and allowing water to infiltrate below the slab.

To correct the issue, our team used PolyLevel® concrete lifting to stabilize the underlying soil and raise the settled concrete back toward proper alignment with the steps. Once the slab was leveled, NexusPro® joint sealant was applied along the joint to seal the gap, protect against moisture intrusion, and allow for long-term expansion and contraction.

This repair restored a smooth, safe transition between surfaces while helping prevent future settlement — an important consideration in Northern Utah’s seasonal moisture changes and freeze-thaw conditions.

Tonnya, a homeowner in Ogden, UT, contacted us because the uneven concrete in her driveway and front walkway had become a tripping hazard. After a free inspection, our crew recommended our 2-part concrete protection system as the best solution. We first used PolyLevel to lift the sunken concrete slabs back toward their original position. Then, we applied NexusPro crack and joint sealant to help prevent water intrusion and protect the concrete from future damage. With her concrete restored and stabilized, Tonnya can enjoy a safer, smoother driveway and walkway.

This concrete entryway in Ogden, UT had begun to settle and separate at both the step and control joint, creating an uneven surface and potential trip hazard near the front door. In Northern Utah, freeze-thaw cycles and seasonal moisture fluctuations often lead to soil movement beneath concrete slabs, causing them to sink or shift over time.

Our team at Davenport Foundation Repair addressed the issue using polyurethane foam injection to lift and stabilize the affected concrete. This allowed us to carefully raise the sunken slab back into proper alignment with the entry step, restoring a smooth and safe transition.

To complete the repair, we sealed the joints using NexusPro, a flexible, UV-resistant sealant designed to protect against water intrusion. Proper joint sealing helps prevent further soil erosion beneath the slab and extends the life of the repair.

The result is a level, secure, and protected concrete surface that improves both safety and long-term durability—without the need for full replacement.

Chas, a homeowner in Oakley, UT, contacted us for a free inspection after large cracks and uneven concrete in his driveway became a tripping hazard. After evaluating the damage, our crew recommended a long-lasting concrete repair solution. We used PolyLevel to lift and level the sunken slabs, NexusPro to seal the joints and cracks, and finished with SealantPro to help protect the concrete from future wear and extend its lifespan. With the repairs complete, Chas now has a safer, smoother driveway with improved curb appeal.

Chas, a homeowner in Oakley, UT, reached out after noticing his front steps had sunk, creating a tripping hazard at the entrance to his home. After a free inspection, our crew injected PolyLevel beneath the concrete to lift and level the steps back toward their original position. We then applied NexusPro to seal the joints and cracks, followed by SealantPro to help protect the concrete from water and other damaging substances. With the repairs complete, the front steps are safer, more stable, and have a clean, refreshed appearance.