Before & After Photos

A homeowner located in Watertown, CT expressed concerns regarding his cracked basement wall. Fearing the issue would prevail, he decided to reach out to the experts at Connecticut Basement Systems to schedule a free in-home consultation.

Following the call, Sales Representative Steve Machnicz arrived at the home to assess the foundation and offer a potential solution.

Shortly later, Foreman Sergio Alves, Jacob Scott, and his team arrived on-site to begin the installation process. By installing CarbonArmor, carbon fiber strips epoxied to the wall, the homeowner's basement walls would gain additional strength and support. Following the install, the homeowner felt much more confident in the state of his basement walls!

A homeowner in Seymour, CT had a crawlspace with old support posts that were not supporting the home above. They called us at Connecticut Basement Systems to find a new, permanent solution. One of our Salesmen, Alex Lopez, visited the home to assess the crawlspace and propose our SmartJack solution. 

Soon after, one of our Foremen, Sergio Alves, and his crew would install this job. They installed multiple SmartJacks throughout the crawlspace to ensure maximum stability and support. They will also help level sagging floors and strengthen them. 

With these in place, the homeowner no longer needs to worry about any sagging or unstableness. 

A homeowner in Derby, CT, was concerned with their foundation and the supports they had in their basement. They called us at Connecticut Basement Systems to find a new, permanent solution. One of our Salesmen, Brad Glazer, went to the house to view the issues and propose our foundation solutions. 

Not long after, it would be time for one of our Foremen, Sergio, and installer Jacob to complete the job. First, they put up some temporary supports where they were needed, then removed the old support posts. Then they poured new footings, and once dry, installed two of our SmartJack support posts. 

These steel beams ensure permanent support and stabilization to the entire home above, leaving the homeowner with great peace of mind. 

Foundation Supportworks Push Piers are made of steel and are driven deep into the soil beneath a foundation to solve settlement problems. Push piers can be installed inside or outside your foundation walls and are not visible once the repair is complete. Push piers not only stop settlement but lift the foundation back to its original position, closing cracks and improving window and door operation.

This West Haven crawl space flooded with 2 feet of water and the homeowners needed a solution to repair and prevent this damage from reoccurring. They quickly gave Connecticut Basement Systems a call to solve the problem.

Our System Design Specialist, Brad Glazer, quickly came to evaluate the situation. He concluded that the crawl space would need SmartJacks, a TripleSafe Sump Pump, a CleanSpace Liner and a Sanidry to repair the damage. With a plan set, Garfield Sanderson and his production team came to the home to start the project.

Smart Jacks were installed to the crawl space to stabilize sagging beams and provide a secure environment, supporting loads of more than 60,000 pounds. Then, a TripleSafe Sump Pump was installed to keep the basement dry with the protection of its 3-pump system. CleanSpace Liner was placed in the crawlspace, which is the durable white material seen in the after photo. The CleanSpace Liner prevents water vapor and humidity from passing through the walls and floors. Lastly, the Sanidry was installed to control humidity and prevent basement mold and mildew. The combination of all of these basement waterproofing products will ensure a pleasant dry crawl space.

As you can see from the after picture, this West Haven crawl space is in perfect order and is waterproof. Now these homeowners are worry free of having a flood destroy their space again thanks to Connecticut Basement Systems.

Flooded Basement? Crawlspace Problems? Give us a call today for your FREE ESTIMATE!