Before & After Photos

This homeowner's crawlspace in Columbia, IL, was open to outside air, causing it to be dirty and moldy. If left unfixed, this could have negative effects on the air quality and circulation in the house, as well as possible critter infestations. The CleanSpace encapsulation system was installed, which uses a liner to keep the crawlspace moisture-free and eliminate mold. This will help reduce the amount of energy necessary to heat or cool the house, keep critters out, and make the air in the house cleaner. 

A crawlspace was not insulated properly in Columbia, IL, and moisture was seeping into it as well. To solve these issues, SilverGlo Insulation was first installed. This features a radiant barrier infused with graphite, so the heat is reflected into the crawlspace, saving energy. Next, the CleanSpace Encapsulation System was installed. This will completely isolate the crawlspace from the earth, dramatically reducing the humidity level. This will also eliminate mold growth and make the whole house healthier. The white finished side will brighten the crawlspace and allow one to see inside easily. This crawlspace will remain dry and healthy all the time!

A crawlspace in Marquand, Missouri, had a messy crawlspace that needed encapsulation and new supports. The floor joists above were starting to show signs of failure and needed to be addressed. Woods came out and first sealed the crawlspace using the CleanSpace System. This system consists of a highly durable sheet of material that is placed directly on the walls and ground of the crawlspace. Not only does this help with the humidity, but this seal will also protect the crawlspace from rot, insects, and the outside elements. Not only that, but CleanSpace also brightens up the crawlspace, reflecting any available light back inward. With this system in place, Woods began to address the stabilization issue. The SmartJack System was then installed. It consists of custom-cut steel beams. They are placed in galvanized fill to equally distribute the weight of the building. They can be tightened over time. This allows maintenance to be done as the ground continues to shift without requiring another costly install. With these two installs in place, this crawlspace will be clean and stable for many years to come.

Before this crawl space had fiberglass insulation that was falling and no longer served its purpose. Team Woods solved this issue by installing spray foam to replace the fiberglass insulation. With spray foam, now this crawl space will keep temperature and serve as insulation to the rest of the house.

Waterloo, Illinois homeowner Shirley G was troubled by her wet, moldy crawl space. They musty environment was a health concern for her and her family. System design specialist Adam R. designed a solution to restore the crawl space.

Foreman Josh B. and his crew installed the CleanSpace crawl space encapsulation system. CleanSpace is an inorganic vapor barrier. It prevents water and mold from overtaking the crawl space. Shirley is pleased to know her home is safe and her crawl space will stay dry.