Before & After Photos

A concrete sidewalk was sinking in Kirkwood, MO, creating a tripping hazard as the slabs were becoming uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. This is a unique approach to repairing sinking concrete.  After drilling small holes into the concrete, a polymer foam is injected into the concrete slab to stabilize the surface. This installation technique allows the foam to expand as it cures, precisely lifting the slabs back up. This will improve the safety of the concrete and restore peace of mind for years to come!

Slabs of a concrete sidewalk were sinking in Kirkwood, MO, causing them to become uneven and a tripping hazard. To solve this issue, the PolyLevel System was first installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the concrete and restore peace of mind for years to come!

A front porch was sinking in Saint Louis, MO, causing distress to the homeowners. To solve this issue, the PolyLevel System was installed. By drilling pea-sized holes into the concrete, polyurethane foam was injected underneath. As the foam expanded and cured, it lifted the porch right up. This system leveled out the porch, giving peace of mind to the homeowners for years to come!

A garage floor was sinking in Saint Louis, MO, causing it to separate from the walls, creating a gap that water was getting into. To solve this issue, the PolyLevel System was first installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the concrete and restore peace of mind for years to come!

Customer, Gary of St. Louis, Missouri experienced cracks and sinking concrete slabs in his driveway. That can can be a tripping hazard and/or cause damage to vehicles. So, he decided to call Woods Basement Systems for a solution. Systems design specialist, Chris A., found that PolyLeveling would work for the job.

Foreman, Bryan N. installed the PolyLevel. It is a high density polyurethane formula that permanently lifts and stabilizes concrete slabs. First,  small, dime-sized holes are drilled into the concrete. Then, the polymer is injected and the hole are covered up with cement. The concrete can be used within 15 minutes, so there's no long wait for it to settle.

Now, Gary M. has a safe, usable driveway.