Before & After Photos

Here is a sump pump that was installed and this shows what it looks like before concrete is laid and after. This process takes a lot of percise digging and laying of concrete and other materials in order to ensure the drainage of water in a clean, safe, and efficient way.

The crawl space in this Evansville, IN home was not a place you wanted to be. It was wet and growing mold, giving the are an overall damp feeling. Since crawl spaces are the lowermost points of a home, the "Stack Effect" explains that air flows in your home from top to bottom, meaning that the mold in the crawl space can be easily breathed in by those upstairs, causing a serious problem. 

Here you can see in the before and after photo that our team worked to remove all the debris and organic material from the crawl space. With that out of the way, they could start the mold removal process. The first step is to seal off openings to prevent cross-contamination. The second step is to remove airborne contaminants by using air scrubbers. Next, we used a HEPA vacuum to remove any loose contaminants. And lastly, we applied a solution that foams on contact, then it penetrates the soil load which will leave a contaminate free surface.

Janice B. knew that her basement needed upgrades. She had been living in this home for numerous years and it needed a refresher. She also had issues with water intruding in her basement and knew that issue needed to be fixed before she spent the money on updating her space. Without further ado, gave Healthy Spaces a call to get her project started!

Not only did Janice B. from Evansville, IN get a new WaterGuard basement waterproofing system installed, she also decided to upgrade her basement walls with our EverLast wall panels. The WaterGuard system was installed around the perimeter of her basement catching any water that intrudes and taking it directly to the sump pump. From here, the water will be taken out through discharge lines. The EverLast wall panels are hard, durable, and won't dent like drywall. Along with that, they will never get moldy, rot, or get ruined by a flood or leak- even if the water is a foot deep for a week! They really brighten up the space with their beige and white color, too.

Janice is thrilled with her decision to get her basement waterproofed and the first step of her Total Basement Finishing journey! 

In this Evansville, IN home, the source of the moisture took several months to discover and by that time, the mold growth was explosive!  The problem began with a small leak in the line coming out from the washing machine.  It was a dripping that traveled along the pipe and was virtually undetectable because it was happening within the walls.  After time, the surrounding area was so moist that the drywall collapsed upon itself at a touch.  The surrounding carpet and pad, subfloor, and pipes were all covered in a thick layer of mold.  

As you can see in the before picture, the mold was growing all over the area, which was hidden beneath the house and was only visible in the crawlspace.  It wasn't until a design specialist from Healthy Spaces took a look at the crawlspace that the damage was finally revealed.  It's suspected that the leak had been occurring for at least 9 months before it was severe enough to be detected.

The after photo shows the amazing difference that the mold remediation team at Healthy Spaces created.  They treated the affected area with a chemical to kill the mold, then thoroughly scrubbed every surface to remove the spores and dead mold.  After removing the debris, they made sure the leak had been resolved and were able to repair any damage from the mold in the subfloor.

This 100-year-old home that our client was in the process of purchasing in Evansville, IN, had a basement that was showing clear signs of water damage. Evidence of leaking water and excessive moisture in the basement posed a threat to the integrity of the home’s foundation, not to mention creating an uncomfortable, damp living space. Without proper waterproofing, the situation was only going to get worse over time, causing potential structural damage and a higher risk of mold growth.

To address these concerns, we installed our SuperSump Pump System and CleanSpace Wall Vapor Barrier.

1. SuperSump Pump System
To effectively manage water intrusion, we installed our SuperSump® Pump System. This powerful sump pump features a Zoeller® ⅓ horsepower cast-iron pump, capable of moving an impressive 2,220 gallons of water per hour at an 8-foot head. The SuperSump® is designed to keep the basement dry by efficiently removing water and redirecting it away from the foundation, preventing further damage.

2. CleanSpace Wall Vapor Barrier

To address the moisture issue, we installed the CleanSpace® Wall Vapor Barrier. This 100% waterproof plastic vapor barrier is the perfect solution for unfinished basement walls. Not only does it direct any water seepage down into the drainage system, but it also prevents future moisture buildup and mold growth. The bright white appearance of CleanSpace® Wall enhances the lighting in the basement, while its durability ensures it will never peel, chip, or flake like traditional paints or sealants.

The basement is now dry, safe, and protected from future water intrusion. The bright, clean walls give the basement a fresh look and provide the perfect foundation if the homeowners choose to finish the space down the line. Best of all, the homeowner now has peace of mind knowing that their basement and foundation are shielded from the elements.