Before & After Photos

Tim called Ayers when he noticed the crack in his garage foundation was getting worse. We sent a crew to his home for a free inspection and from there our System Design Specialists were able to recommend PolyLevel and NexusPro Crack Repair. PolyLevel is a lightweight injectable foam that is injected through small drilled holes in the concrete in order to level it to the desired position. Then NexusPro Crack Repair was used to actually fill the cracks with its silicone sealant that is able to withstand harsh weather.

Tim was relieved to get this crack sealed and leveled out so he doesn't have to worry about his home's safety anymore!

When we got a call from Randy in South Haven, MI that the concrete around his swimming pool is starting to become unlevel, we knew exactly what we had to do: PolyLevel Injections. The "Before" photo that you see on the left shows a zoomed in photo of one slab of concrete, however there were multiple slabs that were in need of PolyLevel injections. One of the many advantages of our PolyLevel injections is that it is waterproof. Once cured, PolyLevel will not wash away. This is especially important being right beside a pool. Another advantage of our PolyLevel is that it cures extremely fast. Within 15-30 minutes after being raised, it will have already reached at least 90% of its strength, therefore it can be used as it normally would very shortly after the job has been completed.

We received a call from Tom in South Haven saying that his driveway has been sinking. After going out to Tom's house and looking at the driveway, we knew that it was in desperate need of some PolyLevel injections. As you can see in the "Before" photo, the driveway is well below its original position.

Our PolyLevel injections harness the expansive force of a structural grade geopolymer to provide fast concrete leveling, fill voids in soil, as well as strengthening soil that has poor load-bearing qualities.

The polymer consists of two separate liquids that are combined right at the injection nozzle to create a chemical reaction that turns the blended ingredients into expanding, high-density foam. The foam then flows into any voids that are present and between loose soil particles, expanding to about 15 times its original volume. This expansive action effectively lifts settled concrete.

One thing that goes over well with our system is that the process is extremely quick. It only takes about 15 minutes to cure, and at that point it’s ready for full loading. So if Tom needed to use his driveway, he would just have to wait about 15 minutes, and after that the polylevel is cured and the driveway is ready to handly any type of weight.

Robert G. contacted us because he was looking to have his sidewalks and driveway leveled. They had sunk about 3-4 inches due to a weak soil issue below the slabs, but luckily our team of experts knew the perfect solution.

We used the PolyLevel system to raise and level out the uneven slabs. We started by drilling small, penny-sized holes into the concrete. The holes were then injected with a specialized polymer material that expanded to immediately lift the slabs. This system used dense and lightweight polymers level out the slabs and deal with the weak soils below that were no longer strong enough to hold the concrete in place. To fill in any cracks or gaps between the slabs, we used the NexusPro Joint Sealant that seals off the gaps and prevents them from expanding over time.

Phyllis worried about the condition of her concrete slab walkway which was cracked and creating a safety hazard. She knew she was unable to fix the problem herself, so she called Ayers to learn about our concrete lifting and leveling options. We sent our experts to the property to assess the situation and provide a solution. They recommended PolyLevel, a polymer foam injection that fills voids underneath the concrete and expands, lifting it to the desired level. Phyllis loves the new look!