Before & After Photos

Paul and Micheala needed help repairing the concrete around their pool and in the front of their house. So they called our team and we installed PolyLevel, a waterproof and long-lasting system designed to fix concrete slabs that have sunk. It uses a polyurethane foam that expands and has a high density in order to lift the concrete slabs back to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

A homeowner from Fennville, Michigan, was looking to repair the sidewalk leading to his front door. Over the years, the cement had become unlevel, so he called Ayers to find a permanent solution. The team at Ayers concluded that the concrete had settled, causing the issues.

The team at Ayers suggested PolyLevel as it would permanently stabilize and level his sidewalk! PolyLevel utilizes an injectable foam inserted below the cement allowing the team at Ayers to level and stabilize the cement! The homeowner was thrilled with the installation, as the sidewalk was in much better shape!

We got a call from a Spring Lake homeowner that had a not so level concrete slab outside of their house. They wanted our professional help, so we came and installed our PolyLevel technology which is an advanced polymer foam that we inject into the concrete through tiny holes in order to stabilize and reinforce the slab so that it is stronger than ever.  PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

The front porch patio of Stephen's house had sunk so he called our team for help. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

Jim's home had stone basement walls, and he worried that the voids between the stones would allow moisture entry. He needed the problem resolved quickly, so he called Ayers for assistance. Our crew of experts stopped by his home to examine the space and recommend a solution. The team suggested Shotcrete, a solution that applies a concrete or mortar wet spray through a high-pressure hose to fill a form or repair damaged surfaces. Jim is happy with the final product!