Before & After Photos

Kirk and Dyna needed help leveling their concrete driveway so they called our team for help. We installed PolyLevel, a long-lasting and waterproof system that fixes uneven concrete slabs. It uses a polyurethane foam that expands and has a high density in order to lift the concrete slabs back to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

The customer called because there were multiple points from her driveway to the porch (including a porch step) that had sinking concrete slabs. She wanted her walkway to be safe.

Luckily, PolyLEVEL is a quick process, so it only took an afternoon for us to go out and raise the problem spots with the PolyLEVEL system.

We recently received a call from Jim in Newaygo asking if we could help him with some sinking concrete in his home. Fortunately for Jim, one of our specialties is lifting concrete back to a level and safe position.

Here at Ayers, we use PolyLevel injections to lift slabs of concrete to a level position with far less weight and disruption that other processes like mud jacking. If you look at the “After” photo, you’ll see three white spots that are surrounding little holes; this is what our injections look like. One of the major advantages of our PolyLevel is that is it waterproof. This is especially important in a situation like Jim’s because as you can see, this job is in a bathroom, where there is bound to water getting on the floor. As soon as the PolyLevel finishes curing, you’re free to get it as wet as possible without having to worry about it washing away. Speaking of curing, our PolyLevel has an exceptionally quick curing time. The concrete is typically ready for full usage just 15 minutes after the injections.

Whether you are need of a slab lifted in your home, driveway, sidewalk, etc., our PolyLevel is a system that is sure to get the job done right.

A homeowner from Caledonia called us about his unlevel concrete walkway and steps to his front door. He wanted our professional help so we drove to his property and installed our advanced PolyLevel technology. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again thanks to Ayers.

The Caledonia homeowner called us to find a solution to his sunken driveway that was causing issues with a handicap ramp they had. The slab had dropped about an inch on one end which caused a lip so they were having troble with the wheelchair. We installed PolyLevel which is designed to repair sunken driveways, uneven walkways and sidewalks, and steps that may cause tripping hazards. PolyLevel is a foam injection that is light weight but strong enough to hold up the load of cars. PolyLevel is also waterproof so that it won't wash away and it won't react with soils or moisture. The best part is how quick the curing time is so that you can park and walk on it within 15 minutes of being installed.