Before & After Photos

This foundation wall on a home in Auburn, NH had a large crack near the inside corner. Over the years, pressure from the soils on the exterior pushed against the wall, eventually cracking it and causing it to lean visibly inwards towards the basement. Our team designed and installed a wall stabilization solution using PowerBrace brackets. These steel, wall stabilization supports are a permanent solution that will prevent the bowing wall from leaning in any further. They are anchored to the concrete floor below, as well as to the floor beams and joists above. Rather than waiting for the problem to get worse, these homeowners took action and now have peace of mind that their foundation wall is not going to bow or collapse. 

This homeowner in Concord, Massachusetts had some concerns with the back wall of their garage as it was cracked and bowing out. They called Erickson to find a permanent fix to these issues. Design specialist John Prince proposed Geolock wall anchors to stabilize the wall. Crew lead Josh Provost and his team installed the Geolocks and the wall is no longer at risk of bowing or failing. There are also cover plates over the Geolocks to be a bit more appealing to the eye on the outside of the house in that location.

This retaining wall in Chelmsford, MA was leaning on two sides. Erickson Foundation Supportworks repaired the wall with GeoLock wall anchors.

A homeowner in Chelmsford, Massachusetts, had concerns with their front foundation wall. The stairs at the front of their home had been sinking for years and the homeowners think the stairs might be causing the wall to begin to fail. They decided to call EFS for a free inspection and our Design Specialist confirmed their concerns. 

Our production team replaced a 6ft section of the foundation wall to build a new foundation wall using a masonry block. 

A homeowner in Carlisle, Massachusetts, had found that the corner of the pool deck was sinking. They got referred to EFS by their landscape company. EFS recommended installing PolyLevel to lift and level the slabs.