Before & After Photos

Customer called in needing to replace the current Egress, not only was the current Egress allowing water to leak into the basement, but in general it just needed to be updated.

High Humidity levels in this crawl space had the homeowner questioning how to reduce the moisture before it started to damage the home. After speaking to a neighbor who had the same issue, he found out that encapsulation helped eliminate his issue, and he immediately reached out to our company.

First, we did a full Mold-X2 treatment to treat the mold that had already started growing due to the moisture. We then installed our SilverGlo insulation, Drainage Matting and a Cleanspace Vapor Barrier. To finalize this install, we installed brand new Vent covers and a Crawl space door, and a SaniDry Dehumidifier, which will keep humidity below 55%.

This homeowner in Earleville, MD, reached out to us regarding floor sagging on the main floor. Our inspector provided a free estimate inspection to find a solution. He suggested installing our SmartJack Support System, which are steel piers that are made to stop the settling. This system can even raise the floor back to its actual level. These piers are able to adjust over time and can help with future settling.

This Earleville, MD, homeowner became increasingly concerned as ongoing water seepage made their basement progressively damper, leading to worries about potential mold growth and wood rot. With each passing day, the conditions worsened, and the homeowner feared that the water damage could cause long-term structural issues. Seeking a solution to prevent further damage and restore the basement to a dry, usable space, they contacted Quality 1st for help.

Our team responded with a dynamic, tailored waterproofing plan. We began by installing our patented WaterGuard Drainage System along the basement’s perimeter to capture and redirect water away from the home. The system works seamlessly with our SuperSump Premier Sump Pump, which efficiently removes water even during heavy rain. To seal out moisture from the walls, we added CleanSpace Wall Panels, which also enhance the appearance of the space. Lastly, to stabilize the foundation, we installed our PowerBrace Wall Repair System, effectively halting any inward movement of the walls.

With these solutions in place, the homeowner’s basement was completely transformed into a dry, healthy, and structurally secure space!

This customer reached out regarding a foundation crack located on the basement wall. We injected the crack with Urethane and applied our FlexiSpan system, which permanently stops water leaks through basement wall cracks.