Before & After Photos

A Mountainside, NJ homeowner noticed a large stairstep crack on the outside of their home's foundation. They contacted Quality 1st Basement Systems and scheduled an estimate with one of our Foundation Specialist to come out and provide a thorough inspection. The foundation had settled and that movement caused those clear cracks. To raise and secure the foundation in place our team installed the Push Pier System. 

A Cream Ridge, NJ homeowner found efflorescence on their basement walls which was a serious sign of water intrusion through the foundation. Over time, mold would eventually grow on the walls threatening the quality of air in the basement. Quality 1st Basement Systems installed a full perimeter waterproofing system to ensure to keep the entire area dry and healthy. Our team installed our largest sump pump system known as the TripleSafe Sump Pump System. 

We usually recommend our PowerBrace System to stabilize basement walls that have cracked and started bowing inward. The hydrostatic pressure in the soil causes this movement and therefore the best way to address the situation and provide a permanent solution would be to stabilize each wall. This Cream Ridge, NJ homeowner's peace of mind was restored once we were able to stabilize and secure each basement wall. 

A Somerville, NJ homeowner noticed their foundation was cracking, so they contacted Quality 1st Basement Systems for an estimate. We installed the Push Pier System as the best solution. Since the installation, the homeowner has not experienced any other foundation issues in their home.

A Manasquan, NJ homeowner noticed their basement walls were bowing inwards. Fearful something serious was occurring with their foundation they contacted a foundation professional to come out and inspect their home. Foundation Specialist, Javier performed an interior and exterior inspection to diagnose what was causing the movement and the proper way to repair. Javier could see the wall movement was from hydrostatic pressure on the opposite side pushing against the basement wall. Over time the wall began to bow inward and cracks formed. To secure the wall in place and prevent future movement, our team installed 

Carbon Armor Reinforcement System.