Before & After Photos

This basement was leaking water and was causing a moldy smell to leak above to the inhabitants of the home. We installed WaterGuard drainage, a TripleSafe sump pump, a Sedona Sani Dry Dehumidifier, and trench drains to stop the basement from leaking. We also installed CleanSpace walls to help cosmetically, as well as help drain water from the walls to the system. 

This homeowner gave us a call because they suspected their existing sump pump was failing. They noticed it wasn't running as often as it normally should, and when they looked under the lid, the water line was above the activating switch. We replaced their old sump pump for them with our SuperSump sump pump. We also attached our UltraSump 4 battery backup system to the sump pump. The UltraSump pump goes fits in the sump liner, and is powered by a battery, (which is off to the right of the "after" picture). The UltraSump will turn on in case the main pump fails, or the power goes out. This homeowner won't have to worry about pump failures any longer thanks to the Basement Systems technologies. 

Basements that have a lot of water built up around their foundation will likely experience two problems: Bowed walls & water intrusions. Unfortunately for this homeowner in Dayton, KY, they were experiencing these problems. We fixed both problems by installing our interior perimeter waterproofing system and our steel I-beam wall repair system. The steel I-Beams we use are called PowerBraces and are not your average I-beams. They are super strong and corrosion resistant, they are able to straighten walls out over time, and were designed to prevent floor joist damage. They can even be fitted with our WaterGuard subfloor drainage system, as seen in the photo below. After installing our two systems, the basement walls were relieved of tremendous amounts of pressure.

This large basement was having some issues with the snowy weather. The walls were also leaking a lot of cold air into the home. We installed our waterproofing system along with our Basement to Beautiful panels to fix both issues. Our Basement to Beautiful Panels cannot grow mold or hold moisture due to their inorganic materials, which makes them the perfect basement paneling option. These panels are our best option for insulating your basement. Their graphite infused material reflects heat back into the basement, and they have a 24% greater insulation value than other standard foam options.   These innovative panels allow your contractor to frame the wall and insulate at the same time, and are equipped with steel studs and built-in wiring channels. Click here to read more about these panels! 

This foundation was 100 years old, made of stone, and had no sump pump. Concerned with moisture issues, the owner of this home in Fort Thomas, KY, decided to give us a call to learn more about our system. After explaining to them about our interior perimeter waterproofing system, we then told them about our CleanSpace wall system. We like to recommend our CleanSpace vapor barrier system for old stone foundations, (and for other types of foundations) for a of couple reasons; Firstly, this vapor barrier is able to conform to uneven stone surfaces due to its flexible nature. Secondly, CleanSpace fits right into our subfloor drainage system - allowing the walls to channel leaks straight down into the drains we install underneath the floor slab. Last but not least, the walls look great, are super durable, and they are made of a patented formula that won't allow mold growth. This waterproofing system will help conserve this homes beautiful stone foundation for years to come.