Before & After Photos

This beautiful property in Woodbridge, Ontario, had a large concrete back patio where there had been major sinking spots along the edge of the home. The homeowners wanted to increase the property by conducting some renovations, starting with the basement. However, when getting their estimate for the renovations, the contractor realized a problem on the outside. The corner of the patio was sinking by three inches to the point that the foundation was exposed. On wet days, water would pool up in that corner which raised concern about the water leaking through the home's foundation and into the basement. The patio needed to be fixed before all the renovations were affected by water damage. 

With some research, the homeowners discovered that Canadian Concrete Leveling could permanently level the concrete affordably without cutting into their renovation budget. Our Project Manager, Kyle O'Brien, arrived at the home to start inspecting the patio. He suggested that we lift the corner above the original height to create a slope where the water shoots away from the house rather than sitting on top of the slabs. Once the concrete's levelled, we will apply our NexusPro® sealant to the joints to protect them entirely from moisture. On a later day, our Installation Foreman went to the home and began leveling. He focused on the sinking points around the corner to fill any potential voids. It was time to lift the three inches to three and a half to create a slope. Next, our NexusPro® sealant was installed around the perimeter. The process was quick to complete, and the homeowners could resume renovations worry-free. 

A home in Etobicoke, Ontario, had a walkway that sunk over time and was severely sloping towards the home. The customers were thinking of selling the home but the walkway was both an unsafe hazard and an eyesore. When is rains hard, the water runs towards the foundation, leaving the customer susceptible to a basement leak. 

The customer called Canadian Concrete Leveling, and spoke to John DiNicolantonio. He explained everything that would be done and then Billy McKeown came in and fixed the problem. He used our PolyLevel polyurethane System. It was injected beneath the concrete to lift and level the slabs and to protect them from further settlement.

The customer was extremely happy that we could complete the job in such a short time frame and that we could do so in such a cost effective manner. They were concerned that they would have to replace the the walkway and were very happy that we were able to work with what they already had to fix the problem.

In the world of home repairs, a lot can change when you start tearing things apart. What begins as one repair can quickly turn into a larger job. A customer in Etobicoke, Ontario, tore up his driveway to have a new one poured when a neighbour pointed out that his side walkway looked sloped. Upon inspection, he realized the entire path had tilted towards the foundation. He wanted the pathway repaired before his new driveway was installed, so he reached out to Canadian Concrete Leveling.

Our Project Manager inspected the walkway and explained how voids beneath the surface cause concrete slabs to sink. Then, he showed the customer a video explaining our PolyLevel® System, which uses expanding polyurethane to lift sinking concrete.

Our Production Department drilled dime-sized holes in the concrete to use as injection ports. Our 300-ft hose allows us to reach anywhere around a customer’s home without the use of heavy equipment. The customer was blown away with the entire process and service received from Canadian Concrete Leveling and wouldn’t hesitate to recommend us to friends and family.

Eliminating risks around your home is something we all try to do. Sometimes it’s an easy fix, but other times you need to bring in professional help.

A customer in Etobicoke, Ontario, was concerned about water entering their basement. A sinking concrete walkway allowed water to pool near his home’s foundation, so he called Canadian Concrete Leveling for a solution. 

Project Manager Joe McColl was sent out to the customer’s home and completed a thorough inspection. He showed the homeowner our concrete lifting solution, and a date was set for the repair.

Foreman Kyle McKeown used dime-sized holes to inject our high-density polymer beneath the concrete slabs. This lifts the concrete back to the proper grade while compressing fill soils below, preventing the issue from returning. 

The customer is pleased with the completed work and is delighted that he no longer needs to worry about improper drainage.

When you need a repair at your home, it can be hard to know where to turn. For some, though, they know exactly who to call when the time comes.

A customer in Toronto, Ontario, had a sinking front step at his home. He was a construction worker himself, so he knew exactly the company to reach out to when he noticed the issue. He was already impressed with our solution and met with Project Manager Kyle O’Brien for an inspection.

Kyle walked him through our pricing and options, and the customer agreed that lifting the step with our polyurethane injections was the perfect solution. He was eager to see the repair for himself and booked an installation date with our Production Team.

Foreman Bill McKeown used dime-sized holes as injection ports to install our high-density polyurethane, PolyLevel®. As it’s injected, it expands, lifting the slab back to level grade. Once the repair was complete, Bill patched the holes with fresh concrete.

The customer enjoyed watching the step lift in front of his eyes. He’s confident it will last longer than he’ll have the home and is happy he made the right call.