Before & After Photos

Concrete is an excellent medium for builders to use, but wear and tear can break it down like all things.

A customer in Gormley, Ontario, noticed his garage floor had cracked and was starting to sink. The problem was getting worse as time went on, so he decided to reach out to Canadian Concrete Leveling for a solution.

Project Manager Joe McColl met with the customer and completed a thorough inspection of the garage floor. Joe explained how a phenomenon called “street creep” can send pressure from the road up to a private driveway and garage. Joe showed the homeowner a demonstration of our PolyLevel® System, and a date was booked for the repair.

Foreman Bill McKeown started drilling As it’s injected, dime-sized holes in the concrete to inject our high-density polyurethane through the driveway. The polyurethane expands, compresses loose soil below and lifts the concrete. PolyLevel® cures in a matter of minutes and weighs 10% less than other lifting methods.

With his driveway repaired, the customer is extremely grateful for the work provided by Canadian Concrete Leveling. He was excited to use his garage later that same day and is happy to report there’s no more annoying bump to drive over.

Renovations were slowly underway before this homeowner sells their house in Stouffville, ON. When prepping to put this one-of-a-kind home on the market, the homeowner knew some upkeep needed to be done around the house. The cedar walling had bleached away and needed re-staining, the deck outside needed to be gutted, and the concrete pads around the pool had started to sink every which way. The contractor she hired contacted Canadian Concrete Leveling for an appointment and also to support a local business. Our Project Manager, Kyle O'Brien, met with the homeowner to see how we could level all the pads without interrupting the contractor. This would be no problem with our PolyLevel® System, our minimal invasion solution. Connecting with the contractor, he mentioned that he would need new sealant around the pool. This was a great segue for Kyle to mention that our NexusPro® sealant would be the best option. 

Our Installation Foreman and Installation Specialist arrived. The scope of work was a small pad to the side of the home and underneath the outdoor kitchen. The contractor took it upon himself to remove the shelving for our team to access the spot better. The job was straightforward, from unloading, installation, and cleanup. Before the installation, the contractor informed us that he had drawn a marker on the wall to indicate where the countertop sat before, and he was amazed to find out that we lifted the concrete more than 2 inches higher. The homeowner walked around the property at and was blown away by the seamless results. 

Uneven concrete is much more than an eyesore. It can also be a safety hazard.

This homeowner in Gormley, ON, called Canadian Concrete Leveling when they noticed two slabs on their driveway were sinking. They were directed to Project Manager, Paul Mendell. He explained to Paul that their main concern was a potential tripping hazard, and they didn’t want to be liable for an injury that could have been avoided. Another fear they had was for the snow plow that came to clear their driveway off in the winter. Hitting the uneven slabs could easily damage the equipment and make for an expensive repair.

Our trusted installation team happily used Canadian Concrete Leveling’s PolyLevel® polyurethane injection system to lift the settled slab back to its original height. Our PolyLevel® is a superior choice because it’s waterproof, cures quickly, is non-invasive and is very adjustable.

In only a couple of hours, the homeowner’s peace of mind was restored. They didn’t have to worry about someone getting injured or pay a hefty bill to fix a damaged plow in the winter. They also could not get over how quickly the lead installer and his team completed the job along with leaving the site so clean!

If you have sinking concrete that needs repair, call us today to set up an appointment for a free estimate!

It's that time of year to clean up the back patio, uncover all the furniture, and get the grill ready, but there was one problem when setting up this space. In Washago, Ontario, this concrete back patio had started to sink and crack. The homeowners were worried about how much this fix would cost. In addition, the concrete was now angled so that when rainwater would land on top, it would get directed toward the home's foundation. Only half the concrete was sinking which resulted in it cracking down the middle. Weighing their options, they decided to have the pros at Canadian Concrete Leveling handle the situation. 

Our most experienced Project Manager, Paul Mendell, arrived at the home to recommend two products that would leave the patio levelled back to its standard height and sealed from all the elements. Our Installation Supervisor began the leveling process using our PolyLevel® Injection System. High-density, quick-expanding polyurethane is injected through the concrete to fill voids and stabilize the soil below. PolyLevel® is a lightweight and long-lasting solution for all sinking concrete. To seal everything together and protect the PolyLevel®, the crew used our NexusPro® sealant. The homeowners were amazed by the professionalism and swiftness of the work. Now it's time to get that patio back in action.  

A successful, entrepreneurial educator and owner of a learning centre for children with special needs and Autism was working on a new project in Goodwood, ON. She was building hydroponic greenhouses to give her students a chance to learn more about growing plants and also experience a little bit about being self-sufficient. Unfortunately, this principal noticed the concrete slabs that were supposed to hold the greenhouses were no longer level but were slanting in some areas as much as 9 inches!

After doing some research, the principal gave us a call at Canadian Concrete Leveling. Our Project Lead, Paul Mendell, met the principal at her site, checked the slabs and then recommended our PolyLevel® Injection System to lift, level and stabilize the concrete. Once our installation team arrived, Billy McKeown and Kyle McKeown injected polyurethane through dime-sized holes in the concrete to lift the slabs back to their original pour and back to being level again.

The principal was ecstatic that we were able to fix the concrete slabs in such a short amount of time. Her project was back on track, she had peace of mind finally, and we were more than happy to provide a permanent solution.