Before & After Photos

This customer's basement wall was bowing inward and very close to failing all together. Wall anchors were installed to not only secure the wall but also straighten the wall over time. Also, surface bonding cement was added to the wall to seal the cracks.

This customer in Tuscumbia, AL noticed they had moisture in their crawl space. To address the issue before more damage could be caused, we came out and encapsulated the crawl space. After we cleaned out all the debris, we removed the wet insulation from the rim joists and started the encapsulation process. This included adding drainage matting, CleanSpace, and a SaniDry Sedona dehumidifier to pull any moisture from the air. 

This customer in Tuscumbia, AL had moisture and mold issues inside their crawl space. They called Frontier out to mitigate the situation. They decided on a partial encapsulation. This included cleaning the old wet insulation out as well as all other debris in the crawl space. After that we installed Drainage matting on all the crawl space flooring, followed by CleanSpace on the floors, and walls, and wrapped around the piers. After that was installed we added a SaniDry Sedona dehumidifier to pull excess moisture from the air.  

Customer's wall was failing but did not have the space for Wall Anchors. Frontier's Carbon Armor was put in its place to insure the wall would remain secure.

This home in Woodlawn, Tennessee had multiple signs of foundation failure.

The wall was pushing-in at the bottom, sliding in at the top, horizontal cracks,  stair step cracks, and bowing. The family is not protected with Power Braces. 

The Power Brace system supports the basement wall. The PowerBrace is a Zinc coated beam and components, with a clean-cut appearance, and a patented tightening system. This is a joist reinforcement method that distributes weight evenly.