Before & After Photos

Dan M. in Red Wing, MN already had our waterproofing system installed in his basement, but when his test results for radon come back high, he contacted us about having a radon mitigation system installed.  The EPA recommends mitigation if the radon levels of a home are at or above 4 pCi/L, and Dan wanted the problem taken care of as soon as possible. 

Our production crew started the installation by creating a suction point through the sump pit for the PVC pipe. Then, they ran the piping up the basement wall, to outside of the home, and up to the roof. We installed a fan in the piping to ensure the radon gas is pushed out and away from the home. Our radon mitigation system is compatible with Dan’s current waterproofing system and was easily installed. The installation only took a couple hours, and Dan’s peace of mind has been restored. 

Larry V. in Lake City, MN had learned about the dangers of radon gas when he visited our booth at a local home show. One of our Design Specialists, Mac Cole, explained to Larry that radon exposure causes 15% of the world's lung cancer cases and kills more than 20,000 people each year. Larry didn't know that the effects of radon gas exposure could be so detrimental to your health. He set an appointment right away to have his home tested. 

The test results showed that Larry did in fact have high levels of radon in his home. Mac explained the process of installing our radon mitigation system and Larry decided he wanted it to be installed as soon as possible. During the installation process, our crew drilled a hole through the floor in the basement to insert a PVC pipe and create a suction point for the radon gas. Then the gas is vented through the pipe and out of the home. Larry is relieved that he took the necessary steps to make sure his family's health is no longer compromised. 

Has your house been tested for radon? If not, click here to set up an appointment!

Mark K. in Lake City, MN had his home tested for radon. When the results came back with high levels, he gave American Waterworks a call. Our Design Specialist, Kevin Kreofsky, met with Mark and proposed a radon mitigation system unique to his home. 

Our Foreman, Dakota Merchlewitz, started the installation process by drilling a hole in the slab foundation of the home and connected a PVC pipe. The radon gas is drawn upward and the pipe guides it to the fan. The fan draws and vents radon safely above and away from the home. Mark is glad he took the necessary steps to protect himself and his family. 

A current customer from Plainview, MN had several of our products installed throughout the basement of her home. During one of her annual maintenance visits, one of our Service Technicians expressed concern that her home might be subject to Radon gas. He explained that this hazardous, invisible, and odorless gas was the second leading cause of lung cancer behind cigarette smoking. She agreed to have her home checked using one of our leave-behind kits. Our Service Tech, Darin, set up the kit and after 48-72 hours she sent it in to obtain the results, which came back at 5.1 pCi/L. Once her results came back, Darin explained to her that The Environmental Protection Agency recommends taking action for anything above 4 pCi/L. He went on to explain that her 1 pCi/L of Radon is equivalent to smoking 2.5 cigarettes. When she wondered what could be done, Darin suggested having a Radon Mitigation system installed. He explained to her that once the system was installed, it would work to pull Radon from the house, pipe it upwards through venting, and push it out and away from the home. She agreed with Darin's recommendation and work began shortly after. Our Foreman, Dakota, and his crew quickly and efficiently installed the system and now our customer can go back to enjoying her home without worries about toxic Radon gas pollution! 

Brandon R. in Lewiston, MN had learned about the dangers of radon gas and decided that he needed to get his home tested. The test results showed a high level of radon. So our Design Specialist, Mac Cole, walked Brandon through the radon mitigation installation process and answered his questions. Brandon wanted to act quickly so his family's health would no longer be compromised, so he had the system installed as soon as possible. 

Our crew drilled a hole through the floor in the basement to insert a PVC pipe and create a suction point for the radon gas. Then the gas is vented through the pipe and out of the home. A fan is also installed at the top of the PVC pipe where the gas is vented out to ensure that the gas is pushed away from the home. Brandon now has peace of mind knowing that his family is protected from this dangerous gas.

According to the World Health Organization, radon causes 15% of the world's lung cancer cases and kills over 20,000 people each year. If you have not gotten your home tested for radon, click here to set up an appointment!