Before & After Photos

A homeowner in Plymouth, MN had an uneven sidewalk and was worried that it was a tripping hazard. She decided it was best to address the issue right away rather than wait, so she started searching for concrete lifting services in the area. She found our website and was impressed with our 5-star reviews and decided to contact us to schedule her FREE estimate. 

In a couple of weeks, one of our Design Specialists arrived at the home to assess the sidewalk. He informed the homeowner that one of the common causes of a sinking sidewalk is soil compaction and settling. When a soil's load-bearing capacity is exceeded, the soil beneath the concrete expands and contracts, causing the concrete slab to sink and heave. For this reason, our Design Specialist suggested our PolyLevel to lift the concrete and NexusPro to seal the cracks and joints. The homeowner was grateful for his explanation and decided to move forward with the project. 

In a couple of months, our Foreman, Troy J., and his crew arrived at the home for the installation. The concrete is lifted by first drilling small holes into the slab. Then, the injection ports and installed, and PolyLevel is injected beneath the concrete slab. Once it has been lifted the crew will ensure that it is leveled before sealing the small holes with concrete. Lastly, the crew uses NexusPro to seal the cracks and joints. Once they were done, they cleaned their equipment and left the home.

Now, our customer can have peace of mind knowing her sidewalk is even! Are you experiencing something similar? Click HERE to schedule your FREE estimate!

A homeowner in Minneapolis, MN, had a sunken concrete slab at the front step of her home and knew that it impacted the curb appeal of her home. Knowing that the issue would continue to worsen, she decided to search for concrete lifting and leveling in the area and was directed to our website. Intrigued by our PolyLevel solution, she decided to contact us to schedule her FREE estimate. 

In a couple of weeks, our Design Specialist, Brad W., arrived at the home to provide a thorough inspection, answer any questions, and provide the best solution for the homeowner. During the inspection, Brad explained to the homeowner that one of the most common causes of settling slabs is soil washout. When it rains or floods, water moves through the ground and washes away the supporting soils, keeping the slab upright. As this continues, gaps and holes can be found in the soil, and the slab would begin to sink. For this reason, Brad recommended our PolyLevel, our waterproof foam expanding formula that accurately lifts sinking slabs, and NexusPro, our silicone-based sealant that provides flexibility and long-lasting durability. The homeowner was happy to move forward with the project and scheduled the installation date. 
In a couple of weeks, our Foreman, Patrick B., and his crew arrived at the home for the installation. They lifted the concrete slabs by drilling small holes and inserting the injection ports. PolyLevel is then injected, filling in the empty spaces in the soil, causing the slab to lift. Once it is lifted to the desired level, the crew seals the holes with cement. Lastly, the crew sealed the joints with NexusPro.

Now, our customer's concrete concerns have been tackled! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!

A homeowner in Minneapolis, MN, had had a continuous issue with her concrete slabs sinking along the walkway. After realizing the multiple trip hazards that have been created due to the issue, she knew it was time to get her concrete fixed. The homeowner began searching for "concrete repair in Minneapolis, MN" and found us. After browsing our website and becoming impressed by our concrete transformations, the homeowner contacted us to schedule her FREE concrete estimate. 

In less than a week, our Design Specialist, Michel R., arrived at the home to asses the walkway. During the inspection, Michel noticed signs of soil washout. He explained to the homeowner that soil washout is the process in which water moves through the ground and washes away the supporting soils, keeping the slabs upright. Over time, this causes gaps in the soil, and the slabs would begin to sink. To effectively fix this issue, Michel recommended installing PolyLevel, our waterproof foam expanding formula, to accurately lift the sunken slabs, NexusPro, our silicone-based sealant that is UV resistant, to repair the cracks and seal the joints. The homeowner happily agreed to Michel's recommendations and decided to move forward with the project.

In a couple of months, our Foreman, Dylon V., and his crew arrived at the home for the installation. The crew lifted the slabs along the walkway as well as the steps. After they were done, they used NexusPro to repair the crack and seal the joints. 

Now, our customer can have a smooth and level walkway! Have you noticed sunken concrete slabs at your home? Click HERE to schedule your FREE concrete estimate today!

A homeowner in Saint Paul, MN noticed that his walkway in front of the steps had tremendously settled causing a bit gap between the slab and the step. After putting this project off for a while, the homeowner realized that it was time to get it fixed so he began searching for concrete lifting in the area and found our website. After browsing through our website, the homeowner was impressed with our 5-star reviews and decided to schedule his FREE estimate.

In a couple of weeks, our Design Specialist, Canon T., arrived at the home to provide a thorough inspection and answer questions. During the inspection, Canon explained to the homeowner that one of the common causes of sinking concrete is soil washout. When it rains or floods, water moves through the ground and washes away the supporting soils keeping the concrete slabs upright. For this reason, Canon recommended our PolyLevel, a water-resistant polyurethane formula that allows for accurate lifting of the slab. Unlike traditional methods such as mudjacking, PolyLevel is efficient, cures quickly, and is cost-effective. After reviewing the proposal, the homeowner happily agreed and decided to move forward with the project.

In about a month, our Foreman, Patrick B., and his crew arrived at the home for the installation. They lifted the settling walkway by first drilling small holes into the slab and inserting the injection ports. Using an injection gun, PolyLevel is injected beneath the slab, expanding and filling in the empty spaces of the soil. This causes the slab to lift to the desired level and the crew would then seal the holes with cement. Once they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind his walkway and front step is no longer a trip hazard! Are you experiencing something similar? Click HERE and schedule your FREE estimate today!

A homeowner in Hamel, MN, spotted several cracks throughout their driveway. Not liking how it affected the home's appearance, the homeowners began looking into a solution for this issue. Since it was a smaller issue, the homeowners did not want to replace the concrete. During their search, the homeowners stumbled across our website and saw the extensive list of services we provide, including concrete repair. Wanting to find a possible solution, the homeowner signed up for their FREE estimate online. Once the appointment was set, we sent one of our Design Specialists, Lance, to investigate the possible issue. Upon arrival, Lance completed the detailed estimation of the concrete's status. Following his analysis, Lance discovered that the driveway was sinking. To solve this issue, Lance purposed a plan that would lift the affected areas and fill in the concrete cracks and joints. After discussing all their options, the homeowners agreed with Lance's proposal. Next, the plans were sent to the assigned crew and production commenced. Our Foreman, Dylon, and his crew arrived at the home to begin the repairs. First, they injected the PolyLevel, a polyurethane foam injection solution, underneath the affected concrete. Once the PolyLevel was properly installed, the crew shifted their attention to filling the various cracks and joints on the concrete. To fill these affected area, the crew utilized the NexusPro Joint Sealant, a silicone-based sealant for joints and cracks specially formulated to provide long-lasting flexibility and stand up to harsh weather conditions. The crew successfully installed all the required products and cleaned up the job site. The homeowners were pleased to know their driveway had been successfully repaired. American Waterwork is happy to help another customer with their driveway concerns.