Before & After Photos

Before installing the PowerBrace Wall System, the customer's foundation wall was bowing inward, posing a risk to the structural integrity of their home. After the installation, the wall is now stabilized and gradually being straightened, ensuring long-term protection and peace of mind.

This Kernersville, NC basement was experiencing severe foundation and moisture issues. The block walls showed horizontal cracks, bowing, and signs of efflorescence from long-term water intrusion. Left untreated, these symptoms could have led to worsening structural damage and increased water problems.

Our team installed GeoLock Wall Anchors to permanently stabilize the foundation walls and prevent further inward movement. To address the moisture issues, we also installed a CleanSpace vapor barrier system along the walls, directing any water into the perimeter drainage system and protecting the basement from humidity and mold.

Now, the basement is structurally reinforced, dry, and ready to provide long-lasting protection for the home. Homeowners in Kernersville can trust our foundation repair and waterproofing solutions to restore safety, stability, and peace of mind.

The main floor of this home was sagging and had many makeshift supports holding it up. We came in and stabilized the floor permanently with our SmartJack support system.

The soil around the foundation became so saturated with water that the hydrostatic pressure built up against the wall caused it to crack and bow. To permanently stabilize the wall and prevent further bowing and cracking, we installed our GeoLock Anchor System. Heavy-duty steel earth anchors are buried in stable soil away from the foundation wall, and connected to steel wall plates on the inside of the wall by galvanized rods. 

Foundation walls can buckle due to soil pressure, water saturation, poor construction, or settling of the ground beneath the foundation. The wall develops cracks, bows inward, or shifts out of alignment, compromising its structural integrity. The CarbonArmor Wall Reinforcement System repairs the problem by applying high-strength carbon fiber straps to the wall, which distribute the load and prevent further buckling or movement, effectively stabilizing the foundation.