Before & After Photos

Click on a photo to enlarge.

Retaining Wall Repair in Mocksville, NC

The GeoLock Wall Anchor system was installed to stabilize this customers failing retaining wall by using heavy-duty anchors installed in stable soil away from the wall. These anchors are connected to steel plates on the wall, creating a secure system that counteracts the pressure causing the wall to fail. This method not only halts further movement but can also help straighten the wall over time, ensuring long-term stability and peace of mind.

Bowing Wall Support in East Bend, NC

From years of pressure, exerted from the dirt behind the block wall, the mortar lines started to crack, and the wall bowed. This problem is very commonplace for older block walls in wet areas, and it is also very solvable. We installed CarbonArmor strips along the wall which creates a tough elastic support that is more than strong enough to counter the pressure coming from behind the wall and keeps the wall supported in the future.

Repairing Lewisville, NC Bowing Walls

Water seepage was causing increased pressure to crack and bow this block wall inward. To avoid a wall collapse, the homeowner hired us to install our carbon fiber strips that stabilize the wall.

Crawlspace Foundation Repair in Tobacoville, NC

This troubled home was experiencing sagging floors and moisture problems due to an untreated crawlspace. Our expert team installed a SmartJack support system with steel supplemental beams to permanently stabilize this home's foundation. Then, we finished it off with our CleanSpace encapsulation system to cover, seal, and protect the area from any water vapors in the ground below.

Push Pier Installation to Prevent Water Intrusion - Garage Repair in King, NC

In King, NC, this homeowner was dealing with water consistently leaking into their garage from under the door even with a seal already installed. After a detailed inspection, we discovered the real issue: foundation settlement beneath the garage slab, which caused the floor to sink and create gaps where water could easily enter.

To address both the structural concern and the water intrusion, our team installed push piers inside the basement. These steel piers were hydraulically driven deep into stable soil and securely attached to the home’s footing, allowing us to stabilize and lift the foundation where needed.

 

Once the structural work was complete, we restored the area with fresh concrete sealing the job and ensuring a smooth, level finish. Now, this garage is protected from further settlement and ready to handle heavy rains without letting a drop inside.