Before & After Photos

The soil underneath this poolside concrete in Loveland, OH, was washing out. This was causing the concrete to slope too far down and away from the pool, leaving slight gaps in the mortar joints. After we leveled out all the slabs using PolyLevel foam, we then sealed the joints using our NexusPro joint sealant. This sealant will make sure water, chlorine, dirt, and other types of debris wont infiltrate underneath the slabs. The sealant is also UV-resistant, which is perfect for areas that receive a lot of sun. There's no doubt that this poolside concrete will last a much longer time. 

The apron of this driveway in Milford, OH, had a culvert underneath it that was washing all the soil away. There was a massive cavity underneath the apron of the driveway, and the driveway was at a massive risk of breaking off. We filled this cavity with our PolyLevel foam, which was able to expand and fill all the gaps, giving the apron a supporting force to make sure it holds up. The foam will also make sure water doesn't reach further underneath the driveway, preventing washout to other areas of the concrete. Our polyurethane composition cures very quickly, so the homeowners could get back to using their driveway almost immediately after we left.

We used our Polylevel injections to raise concrete slabs that had settled over time. The foam was injected under the concrete slabs, which filled the voids under the slabs and lifted them to a proper grade above the surrounding soil. We also sealed the gaps between the slabs after everything was leveled.

This driveway was shifting and causing the concrete slabs to crack and separate from one another. After we used PolyLevel foam and sealant to reconnect them, the driveway was back to looking good. 

This home owner liked our concrete crack repair so much in February 2023 that they wanted more of the same work done in late December, 2023. We used polylevel foam to raise certain parts of the stairs and sidewalk, bringing the concrete back to a level surface.