Find your expert.
Fix your problem.
Breathe easy.
It only takes a few seconds.
Before & After Photos
Click on a photo to enlarge.
Bowing wall repair in Hamilton, On
Michelle is one of original customers of Omni Basement Systems. Her house is on a property that the backyard slopes toward the wall and it is causing it to bow,
Omni stabilizied the block foundation wall by adding Carbon Armor. Carbon Armor is 7" wide strips of Carbon Fiber that is adhered tot eh wall by epoxy. THe top of the all is also achored tot he rim joist using AmorLocks.
Support floor in century home in Hamilton, On
Bradley has a century plus home in Hamilton that needed some floor support. Omni Basement Systems installed the SmartJack system that includes a large concrete footing and a supplemental beam. The SmartJack and the Supplemental Beam are fully galvanized so they won't rust.
Repaired Crawlspace with SmartJacks In Hamilton, On
Matt in Hamilton had a crawlspace in Hamilton, On that needed a lot of help. As is with all crawlspaces, it needed encapsulation which is a vapor barrier over the ground to protect the house from the earth's moisture. The floors were already sagging because of the poor supports that it was sitting on. Omni Basement Systems went to work,. First cleaning the debris out and leveling the ground in order to install the Cleanspace vapor barrier. The next step was to install supplemental beams under the joist system and support them with our fully galvanized and adjustable Smartjacks system. these SmartJacks are designed to hold up to 30.000lbs. and will never rust.
Support sagging floors in Hamilton, ON
Adam has a century-plus-old home in Hamilton, ON. The floors were sagging due to improper support systems. Omni Basement Systems replaced and added their SmartJack system to support the sagging floor properly.
SmartJacks are house jacks but with a huge difference. They are galvanized jacks that are fully adjustable. The footing for the jacks is engineered to create a "bulb of influence" under the floor, which will distribute the weight more evenly throughout the soil below.
Wall Stabilization in Milton, On
Sharon has a house with a block foundation that is showing signs of bowing in Milton, ON. Phil from Omni Basement Systems recommended using CarbonArmor for wall stabilization. CarbonArmor is 7" wide strips of Carbon Fiber that is epoxied to the wall. Then the lower blocks on either side is filled with grout to solidify the wall
Total Before & After Sets: 350