Before & After Photos

A home in Brampton, Ontario, had a pool deck that was sinking in various areas. The sinking concrete created various trip hazards around the pool and needed to be taken care of immediately so the the concrete would not continue to sink.

The customer called Clarke Basement Systems and the Canadian Concrete Leveling team went to fix the problem. John DiNicolantonio explained the process that would be done to the pool deck. Billy McKeown and the team injected PolyLevel polyurethane beneath the concrete to lift and level the slabs. The polyurethane followed the path of least resistance underneath the concrete to fill all of the voids and then expanded. We were able to use the expansion of the polyurethane to lift the pool deck to protect them from further settlement. The customer was satisfied that we were able to remove the trip hazards around their pool deck without making a complete mess of their backyard. 

Garage floors tend to have voids or spider cracks throughout, but this home in Brampton, Ontario, had started sinking dramatically. The sinking on one side split the entire floor horizontally, which intrigued the homeowner of 40 years to call our team. Since the concrete was thick, he wanted to find a solution that would not involve gutting all of it only to re-pour more. We sent our Project Manager, Paul Mendell, to the home to find the best solution to tackle this sinking driveway. He recommended we inject our PolyLevel® injection system evenly to avoid cracking, safely lift the driveway, and give it the original slope it had previously. Regarding the crack, Paul showed the client our NexusPro® sealant, which can be colour-matched for a more pristine look. The homeowner's response was incredible. His face lit up with joy, knowing that our method would save him a lot of money, and he could already visualize the clean work that our crew would do. 

On a later date, our crew, consisting of Foreman Bill McKeown, and Specialist Nestor Cabrera, came to the home and began the garage floor transformation. The approach was to inject bits and pieces amongst 16 injection points to lift the garage floor evenly and prevent spiderweb cracks from forming. Within no time, the garage floor was achieving the desired slope Bill was looking for and the homeowner was already amazed by the effortless lifting the PolyLevel® had done. The final treatment to the floor was sealing the big crack and dividing the concrete into two segments. Nestor started buffing the fracture to prep the Nexus. Bill followed right behind with the colour-matched material and smooth it out to sit flush with the rest of the concrete. The results were immaculate. 

This customer in Brampton, Ontario, was doing her spring cleaning in her backyard when she discovered how uneven the concrete slabs in her front and backyard had become over time. Some of the slabs had begun to crack, and she did not want any more damage to reach a point where she would have to replace the concrete completely.

A trusted crew from Canadian Concrete Leveling was assigned to help find a long-lasting solution for our customer's front and backyard. Our team first installed the NexusPro®, which adheres to any cracks in the concrete. This strong sealant can withstand high UV rays and other harsh weather conditions. Next, the PolyLevel® polyurethane is an injection pumped through small holes drilled into the concrete and ultimately levels the concrete back to an even grade.

In the end, our customer was relieved that her concrete was fixed with a long-term solution, and she didn't have to spend much money on replacing it.

Our client had trip hazards on walkways and medians in their parking lot, which was a severe issue. They knew that to keep their customers safe, they would need to remove all of the trip hazards.

That's when they contacted Canadian Concrete Leveling for their free estimate.

Our Managing Partner, Anthony Melia, assessed the area and concluded that PolyLevel® installations for all sectors were needed to remove all trip hazards.

The plan was set, our Installation Foreman, Bill McKeown, went to the property to perform all PolyLevel® Installations.

When the work was complete, our client was full of relief knowing that his customers would be safe from any trip hazards.

A home in Midland, Ontario, had a problem with the basement floor. The concrete had dropped down 2 inches towards the side of the house. It also had a fracture crack across it where the floor had snapped and began to sink. The homeowner could not use the space since it was uneven and the crack was a trip hazard for everyone.

The homeowner called Canadian Concrete Leveling and spoke to Paul Mendell who explained our PolyLevel Injection system. Our installation team injected the polyurethane through small dime-seized holes and lifted the floor back up to its original position. 

Not only was the trip hazard eliminated, the homeowner really appreciated the cost-effective, non-invasive PolyLevel process, without any of the mess and disruption associated with having to tear out and replace a basement floor.