Before & After Photos

A homeowner in Bemidji, MN, noticed that his home was taking a long time to heat up during the winter. Unsure of the cause, the homeowner decided to do some research and learned that a bad crawl space could be the issue. After learning this, the homeowner contacted us to schedule his FREE estimate. 

In a couple of weeks, our Design Specialist, James N., arrived at the home to provide a thorough inspection, answer any questions, and provide the best solution for the homeowner. During the inspection, James explained to the homeowner that one of the common causes of crawl space damage is vents. This is moisture vets allows moisture to come in, causing the walls, floor joists, and insulation to become saturated with water from condensation. For this reason, James recommended CleanSpace, our vapor wall barrier that prevents water from permeating the floors and walls, and Drainage Matting, an extremely durable matting that creates drainage space between the CleanSpace and the ground beneath the crawl space. The homeowner happily agreed and decided to schedule the installation date. 

In about a month, our Foreman, RJ L., and his crew arrived at the home for the installation. They installed 803 sqft of CleanSpace and 527 sqft of Drainage Matting. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer will have a dry crawl space! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!

A happy customer from Pine Island, MN was so thrilled with the results of her first PolyLEVEL project, she is having us return at the end of Septemeber for another project.  In her first project, American Waterworks was challenged with closing a 3 inch void between the sidewalk and the concrete porch near the entrance of her home.   Within two hours, our Team had leveled the concrete slab using our trusted polymer foam injection services preventing any further settlement for years to come.  

One of our Pine Island, MN neighbor's contacted American Waterworks with concerns about their unlevel driveway and cracked concrete garage apron.  More specifically, Britt & Julie's garage door would not seal completely when closed, allowing water to seep into their parking space. American Waterworks used our trusted PolyLevel system to lift and level the concrete driveway slabs back to their original position and replaced the concrete garage apron to prevent any further water damage.   

A homeowner in Pine Island, MN, had noticed water along their basement and had grown concerned that their basement's waterproofing system had failed. Knowing the issue must be addressed, the homeowner contacted us to schedule their FREE estimate. 

In less than a week, our Design Specialist, Michel R., arrived at the home to conduct a thorough inspection. During the inspection, Michel noticed water leaks along the walls and the edges of the basement. To fix this issue, Michel recommended installing WaterGuard, our below-the-floor perimeter drainage system, CleanSpace, our vapor wall barrier, SuperSump+, our reliable sump pump system, IceGuard, our anti-freeze discharge line, and Aprilaire, our strong dehumidifier. The homeowner happily agreed to the recommendations and decided to move forward with the project.

In a couple of months, one of our crews led by Aaron E., arrived at the home for the installation. They installed 20ft of WaterGuard and CleanSpace, 1 SuperSump+, 1 IceGuard, and 1 Aprilaire. 

Now, our customer can have a dry basement! Noticed water leaks in your basement? Click HERE to schedule your FREE estimate today!

A company building in Whipholt, MN had water leaking into their basement, and their walls were damp after heavy rains. They got in contact with American Waterworks for our basement waterproofing systems. Our Design Specialist, Chad Johnson, went to the building for a FREE Estimate and carefully inspected the basement. After a thorough diagnosis, Chad proposed our CleanSpace Wall System Vapor Barrier and our WaterGuard Drainage System. The company owner was confident in our products and their warranties, so they signed the contract, wrote out a deposit check, and scheduled a date for the installation. 

Our Foreman, Corey Tollefson, and his production team began the project by breaking out the concrete floor perimeter, forming a trench. In the trench, our team installed our WaterGuard Drainage System, which serves as an underground drain, collects water seepage from basement walls, and prevents water or mud clogs. Next, our team installed our CleanSpace Wall System Vapor Barrier, which is made to prevent mold and humidity, give the basement a neat and clean appearance, and saves money on energy costs. To complete the project, our team filled the open gaps with river rock and applied new concrete over it, ensuring the basement looked neater than when they found it. 

Is water leaking into your basement? Call American Waterworks today and click HERE to request a free estimate!