Before & After Photos

The chimney on this Cincinnati home had started pulling away from the house due to foundation settlement, leaving a visible gap.  We installed helical piers and used hydraulic pressure to lift the chimney back into position against the home. The structure is now level, secure, and permanently stabilized. Be sure to scroll through the photos to see the transformation.

Filling in wall cracks with a sealant may fix the short term problems, but the long term probably will still exist. Bowing walls can lead to some serious problems if not addressed, so give us a call for a free estimate!

The sinking corner of this garage in Newport, KY, was causing a large crack to appear between the mortar in the block wall. When a block wall cracks due to settling, it commonly appears in a "stair-step" fashion. If you'll notice in the before picture, the crack looks like a staircase, and so that's where the name comes from. This often happens because the weakest point in a block wall is the mortar, so the mortar breaks away first. If you'll notice in the after photo, we were able to lift the foundation back up with our steel pier system, effectively closing the crack. Not only do our steel piers allow us to lift a structure back up, they also allow us to guarantee the foundation won't move vertically for the lifetime of the structure. After we completed the job, the homeowner was happy to be able to seal the crack back up without the thought of it ever being able to move again. 

This pier underpinning project to stabilize this sinking foundation required us to tear down a fake wall. This homeowner was a previous client of ours when we stabilized the backside of their garage. They were happy with the job we did, so they had us out again to install more piers. This time, we stabilized the front side. If you want to read more about this project, click this link to read our case study! Click here!

The floors above this basement in Falmouth, KY, were sloping and sagging. This was not only resulting in loud creaking sounds for the inhabitants of the home when they walked across the floorboards, but it was also causing gaps to appear between the walls and floors upstairs. After inspecting the basement, our team found that several of the existing support posts were no longer providing adequate support to the main beams. We replaced them with adjustable SmartJacks to permanently stabilize and lift the floor structure. Once installed, the floors were level again, the creaking stopped, and the upstairs gaps closed up, restoring the home's comfort and stability.