Before & After Photos

A La Crosse, WI, homeowner was growing tired of a piece of uneven concrete in the walkway in front of his home. Each time he walked over the cracked concrete, he took a tumble as it was protruding. He began to look for contractors offering concrete repair in WI. When he found our website, he signed up for his FREE estimate, and several weeks later, Ross J headed out to the home. 

Ross got right to work assessing the concrete. When he finished, he informed the homeowner that we could address the issue using our PolyLevel injection. This product is a polyurethane foam that expands as it's injected beneath sunken concrete. It works to fill voids left by soil erosion, slowly lifting the concrete back to its original resting place in the process. Ross went on to say that, as an extra measure of protection, he was recommending our NexusPro. This silicone-based sealant is applied to all the cracks and joints of the newly lifted concrete. It works to prevent unwanted moisture from getting below the concrete to the vulnerable soil below. The homeowner agreed with Ross's plan, and scheduled the job on the spot. 

On the day of the project, our Foreman, Sam K, and his team were able to lift, level, and seal the concrete with no issues. Now, our customer can enjoy his home without worries of uneven concrete! 

A homeowner in La Crosse, WI, noticed their sidewalk was quite uneven. Worried this could become a tripping hazard, the homeowner knew they needed to find a permanent solution. Knowing they could not repair it themselves, the homeowner began looking into “concrete leveling near me”. At the top of the list was American Waterworks, so the homeowner decided to take a closer look at our concrete lifting and leveling services. Impressed with our award-winning products, the homeowner decided to sign up for their FREE estimate.  Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Will.  After Will arrived, he began his thorough inspection of the home. During his inspection, Will confirmed the sidewalk was suffering from settlement. To prevent the settlement from continuing, Will recommended installing PolyLevel underneath the struggling sidewalk. After hearing Will’s recommendations, the homeowner decided to go ahead with the proposal. Next, Will sent the proposal to our Logistics team to build and schedule the project. Once the project details were finalized, the plans were sent to our Foreman, Dylon, to begin the project. A few weeks later, Dylon and his crew traveled to the home to begin the installation. First, Dylon began by lifting the sidewalk back to its original position. The crew utilized PolyLevel, a polyurethane foam solution, to lift the sidewalk back to its original position. Next, Dylon and his crew shifted to filling the voids and joints with NexusPro, a silicone-based solution. After the joints and cracks were repaired, the crew cleaned up their materials and left the home. The homeowner was relieved to know their tripping hazard was eliminated. American Waterworks is happy to provide its homeowners with peace of mind.

A homeowner in Jamestown, ND, was driving into their garage when they noticed a major drop. Worried this could cause damage to their car, the homeowner knew they needed to find a permanent solution. Unsure who to work with, the homeowner began looking into “concrete repair near me”. The homeowner compared several companies, and the first one to catch their eye was us, American Waterworks. Impressed with our five-star reviews, the homeowner knew we were the ideal company for their project.  Since they were already on our website, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, James. A few days later, James traveled home to begin the thorough inspection. First, James introduced himself to the homeowner, then he began the thorough inspection. After he completed his walk-through, James confirmed the sidewalk was sinking and needed to be lifted back into place. James recommended installing PolyLevel to restore the concrete. Knowing this was their best plan of action, the homeowner decided to go ahead with the plans. Next, James sent the plans to our Logistics team, and they built the project. After the Logistics team gave their final stamp of approval, it was assigned to our Foreman, Charlie, and his crew. A few weeks later, Charlie and his team traveled to the home to start the installation. First, Charlie and his team ensured the concrete was ready for the PolyLevel. PolyLevel restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel was installed, the crew cleaned up their materials and left the home. The homeowner was impressed with the excellent work completed by the crew. If you are noticing a similar issue, sign up for your FREE estimate today!

A customer from Onalaska, WI got in touch with us when he began to notice his front walkway was beginning to sink, creating a large gap between the ground and his door. He was afraid that if he left the issue unresolved, he would run the risk of experiencing a nasty trip due to the height difference. When he called in he used his FREE estimate to have our Design Specialist, Romeo, out to his property do a thorough inspection. Once Romeo completed his walkthrough, he recommended our customer use our PolyLevel injection to lift the slab, erasing the gap. Our customer agreed and work began shortly after. 

Our Foreman, Dylon, began the process by strategically drilling holes into the concrete slab. Next, he injected the PolyLevel into the hole. As the foam hardens, it expands, lifting the slab. Dylon closely monitored the process to ensure it returned to the correct place. Finally, he sealed the joints and holes of the project using our NexusPro, a silicone-based sealant for joints and cracks specially formulated to provide long-lasting flexibility and to stand up to harsh weather conditions. Once the job was complete, our customer was happy to know that his worries about tripping were in the past! 

A homeowner in Onalaska, WI was tired of dealing with the problems in his driveway. Over the years many of the slabs had sunk in different directions which resulted in small bumps that his car hit every time he drove in and out of the garage. Not wanting the problems to continue getting worse, he went online to look for an effective solution that would repair his concrete. He found the American Waterworks company website and after looking through what we had to offer, signed up for one of our FREE estimate appointments. The homeowner was eager to learn more about what could be done once our Design Specialist, Will Reader, got to the home to inspect the driveway. Will explained that our PolyLevel foam and NexusPro sealant were the perfect solution for the concrete to be level and smooth again. The homeowner agreed to the installations and later was greeted by our Foreman, Troy Johnson, and his crew. They carefully installed the two products, and the homeowner was very happy with how the project turned out.

If you're ready to make changes to your driveway, you know who to contact! Get your FREE no-obligation estimate with American Waterworks today.